Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking for a new or lightly used 7186 Edelbrock Peformer RPM intake with no modifications. PM me here if you have something within 300 miles of Savannah,Tenn...THANKS!
Two 489 Yukon after-market cases (one new one slightly used), both Moser 35 spline spools, new bearings & new 1350 u-bolt pinion yokes (companion), one with new Richmond 4.30 gearset, the other with slightly used 5.12 Richmond gear set, $850 for the 4.30, $800 for the 5.12, PLUS shipping from...
472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and installed a new...
New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel and Chrysler 3 and 4spd transmissions. All parts included as from the factory, including blockplate, all fasteners and reducing rings $900 plus shipping. PM me here if interested, thanks.
Standard bore 1970 383 block, missing main caps; it's been cooked, clean, shot blasted and magnetic particle inspected with no damage. Casting no. 2468130-8, dtd 10-24-69, no vin on the pad, S 383 and it has the letter stampings on the oil pan rails that designate piston sizing (DDDE/DDDE). If...
Supposedly new 5.57 8-3/4 gear set for 489 case, brand unknown but it is stamped USA with the 'heart' stamping. I got these and a set of 5.38s 2 years ago installed with spools, but decided they're probably a bit too low for my current project. I removed them tonight and will replace them with a...
NOS alumiunm throttle bracket for 4 bbl carburetors, dual retrun springs w/adapter, never bolted on, $30 plus shipping from Savannah, Tn. PM me here if interested, thanks.
As a side note, I forgot to mention the clamping bracket is probably for an after-market Locar-type cable, not the OEM type.
New in-the-box Edelbrock Performer intake manifold for the low deck 361-383-400 engines, still wrapped in plastic, $300 plus shipping from Savannah, Tn. PM me here if you have an interest, thanks!
It's looks like I'll be going back to work, SOOOO...I'm looking for a .0001" test indicator, Federal/Starrett/Mitutoyo/Brown-Sharpe/Interapid, no imports, nothing needing repair, must pass calibration/certification. 12-24" vernier ht gage, no damage/no rust/no imports, same American-made...
New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel. All parts included as from the factory, $950 shipped within the continental 48 states. PM me here if interested, thanks.
New parking brake cables for 62-65 B-body/62-66 A-body, $65 plus shipping from the Savannah Tn area. PM me here if interested and thanks for viewing...wb
Unknown 8" converter for '67-later 727, possibly A-1. New hub installed by Spec-Rite converters of Redding Calif; they stated it's a decent converter and should flash approx 4800-5000rpm behind a 440-type bracket engine. Comes with out-of-date SFI flaxplate and bolts, $500 plus shipping from the...
Very nice MP M-1 intake manifold with very little use, $300 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb
New in-the-box Edelbrock AVS2 800 cfm carburetor with new unopened strip/jetting kit, $380 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb
'187' big block oil pan with 3/8" pick-up, very good condition, $150 plus shipping from the Savannah, Tn area. Pan is clean with good paint, ready to install. PM me here if interested, thanks for viewing...wb
Looking for old Cam Dynamics 7000+ 383-440 'cheater' cams produced in the 80s-90s. I'm looking for one undamaged to use as a regrindable core. If you have something, pm me here thanks...wb
Moroso dragster/FC pan, baffled, set-up for -20an inlet, trap door, mounted but never used, excellent pan for tube chassis car or highly modified k-member, $750 plus shipping from the Savannah, Tn area. Questions or more pics? PM me here, thanks for viewing and thanks for the ad space, Joey...
Looking for the above mentioned 2951666 383 intake manifold, yup that good old factory OEM iron monster. HOPEFULLY, something close to Savannah, Tn; to curtail the wicked shipping costs. PM me here if you have something, thanks...wb
I'm in need of a Chrysler throttle shaft lever for a Carter AFB/AVS carburetor (possibly TQ carbs as well). I have an aftermarket AFB that had been butchered/damaged and the lever was removed, so I need one from a Chrysler/Dodge/Plymouth AFB/AVS to replace it.
Please Note: this part can be...
Looking for a high-quality 130T x 6 bolt, neutral balance, after-market Chrysler flywheel, steel or aluminum; please, no junk! New is best, used is acceptable if low-use with NO damage or modifications, and no 40+ year old units. Thanks...