Search results for query: *

.30 over 440 with cross-ram has never run cool—had a BeCool radiator with twin electric fans—ran 190-195 on a cool day. Hit 205 and more on a hot day accompanied by vapor lock. Last ditch effort was to order a radiator from Bob at Glen-Ray. What a major difference. 88 degrees and humid...

Looking for a nice 65 Dodge or Plymouth B-Body 4-door--pics would be appreciated.

We've all seen it and some of us are victims of it--OTHERS TEXTING WHILE DRIVING. DMV's nationwide now report more accidents involving "distracted driving" than drunk driving. Two of my 20 sales people have rear-ended other motorists at traffic lights while texting--it's out of control. Laws...

Greetings all, Is the Satellite emblem on the 65 right aluminum tail panel the same Satellite emblem on the right side of the 66 trunk? They look identical, but I'm appealing to the experts.

With two electric fans pulling 23 amps each, I replaced my OEM 46 amp alternator with a 75 amp Powermaster. I upgraded the charge wire that leads from the alternator to the starter relay to 8 AWG with a 12 AWG fusible link. With the OEM 14-16 gauge running to the starter, am I defeating the...

Has anyone replaced their DOT 4 brake fluid with DOT 5? Obviously you have to bleed the entire system--just how far do you have to go? Some have said bleed until the purple DOT 5 comes out, others say to go as far as disassembling each wheel cylinder, replace all rubber seals, etc. DOT 5 has...

I'm in need of the stainless steel trim at the rear of the driver's window for my 65 Satellite. This is the piece that mates to the forward felt strip on the rear window when the door is closed. If you can help, send me a PM--Thanks, Bob

Can someone help me--I'm in need of the stainless steel window trim for the driver's window on my 65 Satellite--this is the piece on the rear of the driver's window that mates to the felt piece on the rear-passenger window when the door is closed. Will buy the entire window if you don't want to...

Tom at Evans suggested I switch water pump pulleys on my 440 from current 6-3/8 diameter to smaller diameter to increase flow. The only H2O pulleys I can find under 6" are for small blocks. Are they interchangable?

Again, we spend a great amount of time staring at the dash--which one's are just GODAWFUL???

Though we all LOVE cars--or we wouldn't be frequenting this site--we spend the majority of "contact time" with our cars DRIVING THEM. That said, I've always appreciated a beautiful dashboard. And though I love my Mopars, some B-Bodies, in particular, had horribly designed dashboards. Some of...

Currently have SSBC front discs with stock drums in the rear on my 65 Satellite. I need more braking power but don't want to go with a power booster. I'm being told to replace the dual reservoir MC with either a 7/8" or 1" Wilwood dual reservoir. What's the difference in the two and what am I...

What is required to convert my tail lights to LED? I bought white LED bulbs that are compatible with the standard sockets, but only the running lights burn--stop lights don't illuminate at all. Checked everything and wound up putting the incandescent bulbs back in.

I want to convert my 440 max wedge from its hydraulic flat tappet to a hydraulic roller. My current cam specs are: Adv. Duration of 276/284 with .513 lift intake and .533 lift exhaust and lobe seperation of 112. I've got a 3000 stall converter, A&A crossram with two 600 cfm Edelbrocks, Crane...

Can someone verify the correct direction for the 7 "gills" at the rear of the quarters on my 65 Satellite? My friend says they're supposed to have the black inset facing toward the front of the car (as if they're gathering air) and I installed them with the chrome bulge toward the front and the...

Hi All, I'm the newest guy from Plymouth, Michigan. This is my third 65 Plymouth B-Body (first two were Belvedere II's, this one is a Satellite). It's undergone a complete rotisserie restoration with complete Legendary interior (black) painted 02 G.M. Medium Red Metallic (much darker than the...

Greetings, All; I'm a new member looking for some advice: I'm rebuilding the door hinges on my 65 Satellite. I have the new bushings installed and was ready to finish the installation when I realized the rollers are trash. I've searched online and can't find just the rollers. I purchased a...