Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, I forgot to follow through and give an update on the repair.
I replaced the entire wire harness from bumper to bumper, but, there is a 6 inch jumper wire that connects the steering column harness to the main wire harness ( my car loaded with options like A/C, etc).
I took the jumper wire...
66 Charger
I replaced the turn signal unit and I have brake lights. Now I do not have "ANY" taillight running lights.
Both blinkers work and brake lights work. NO running lights just on the taillights. Running lights are working on the front of the car.
Auuuuuuugh !!!!!!
So far this is what...
Ok,
I replaced the turn signal unit and I have brake lights. Now I do not have "ANY" taillight running lights.
Both blinkers work and brake lights work. NO running lights just on the taillights. Running lights are working on the front of the car.
Auuuuuuugh !!!!!!
So far this is what I have...
Sorry about that, the car is a 66 Charger.
I had a board holding the brake pedal down & i went through the left & right turn signal with the running lights on & off. I did check all connectors and the grounds. Re-cleaned the area of the grounds and wire wheeled the screws just to make sure...
Ok, the turn lamps and running lights work, but the right brake light will not light.
Things that I have checked;
brake stop switch and connectors
all the connectors from the brake switch to the steering column to the driver's kick panel connector
Checked and replaced all the 1157 bulbs...
I have both interior fiberglass sail panels that go from the wheel house to the headliner & up to the glass. Both sail panels were professionally repaired by a restoration body shop. The panels were re-textured to match the original factory texture. A quick cleaning and paint prep and...
Your console is repairable. Right from the factory the console is basically fiberglass with a sprayed on texture material. This can be repaired and the texture duplicated. I have repaired several consoles, including my own. The entire nose was cracked and a small section missing. Fiberglass work...
I think a stock looking car looks good with the trim. On the other hand, a street machine or mild custom also looks very good without the trim. Bottom line, a matter of your own personal taste!!
Like others I have had a bad experience with PG Classic. If there is any issues or problems, PG Classic will not address the issue. In my case I was ignored and no corrections were made. I purchased the dash bezel from PG Classic and the fit is poor and the chrome was peeling off the plastic as...
Calvin Coolidge
Christmas is not a time nor a season, but a state of mind. To cherish peace and goodwill, to be plenteous in mercy, is to have the real spirit of Christmas.
Norman Vincent Peale
I truly believe that if we keep telling the Christmas story, singing the Christmas songs, and...
Mark,
After numerous hours of playing with the dash and replacing both sending units 3 times. I did get the oil gauge working, but no go on the Temp. I have run a jumper wire from the temp to a ground and the gauge with peg to the high side. This is almost a year playing with this and I still...
I have some interior parts. Not sure, either a left or rt side chrome headliner molding, both interior fiberglass panels that go from the wheel house to the headliner & up to the glass. The trunk lid molding ( not the emblem). A metal dash.
PM if interested in any of the items.
I have a right fender. The fender was professionally rebuilt by a body shop. Rust on the rear bottom edge was cut out & new metal welded in. All dents were taken out. PM me if interested