Search results for query: *

Put 4 wheel disc brakes on it also with moser axles. All the numbers I have seen and read show 259 383 4bbl 4 speed cars made in 68 but the numbers don't really matter to me I just wanted a true 4 speed 68 charger.

Awesome, I also have one of the 1 of 259 68 charger 383, 4bbl 4speed too. Has a non matching number 383 indy heads, roller cam and some other stuff in it, but now has a 5 speed and a dana 60.

bought mine in 08 was in car for a week or so sat unhooked until roughly 2014, never put a battery charger on it, need a battery for a forklift so i put it in the forklift and it just started acting up after the starter in the forklift went bad. The forklift gets started 30-50 times a day and we...

I was also thinking of carefully stripping the casing of each wire at the factory connector and soldering wires to each one to lead to the box, then if I go back to factory gauges the harness will still plug on and I can just tie the Dakota wires up under the dash or just snip them off as close...

I wanted to make a harness with using pins from a extra circuit board, your idea of a connector with factory pins and then another harness for the Dakota box is good, I don't plan on going back to the factory ( Redline Gauges restored the factory gauges and they got pirated for our parents 69...

I picked up a set of the Dakota Digital gauges for my 68 charger, I put a new dash harness in the car and my question is how are you guys hooking the dakota gauges into the factory harness? Since the original circuit board has the pins, what is the best way to hook to the wires in the factory...

Thanks everyone for the input. For the money I think I will get the on the link that ColoradoDave sent, for the money it should be good, I do not see any reason to spend a extra $130 for the MSD timing light since it just needs to be a fixed light.

So as long as I get a fixed timing light I am good to go with the MSD ignition, is the any brand timing light that you would recommend? Thanks

I was looking at older ones on ebay too. Not sure how i found myself on the timing light topic but found it interesting and since I am using MSD stuff I want to make sure it gets timed correctly. Read a lot of different forums last night, mopar, chevy, ford and buick all on the same topic of...

Stumbled on some other forums that say not to use dial back because the MSD will give them erratic readings and MSD recommends not to use them too. Some things I read say you can use a dial back and some say not to. Once site said if you use a dial back hook it to a battery that is not hooked up...

What is the best and correct timing light to use with a MSD 6AL and pro billet dist.? I read not to use dial back timing lights and was wondering what other members running MSD igntions use. What is a good brand timing light to buy. Thanks

I have one under my 68 charger that came out of a 70 charger r/t 4 speed car. It has moser axles in it and a machine shop went through it and put new bearings in it, they are the original 3.54 gears and sure grip unit and the machine shop said gear pattern and gears looked good. The car has not...

We had a 451 stroker built by Muscle Motors for our parents 69 charger. We told them we did not care about horsepower just wanted tons of torque because we are putting anywhere from 2.76-3.23 highway gear in it so if they want to go on a road trip on the highway the thing ain't turning 3200rpm's...

Did you try South Bend Clutch? They sell new clutches ( not sure if they carry bb mopar)and can rebuild yours. I sent them a clutch for a old better 83 dodge truck and they rebuilt it. The tech guy said everything was USA made except the friction material. He said no ones friction material is...

I guess I mean they took a " dump on me" or went bad. The problem I had was we were fighting a extremely rich condition, so I was on the phone with the carb builder and trying different ign. timing settings and no matter what you did it kept getting worse. The lifters did start to get noisy. We...

My engine builder measured and had the pushrods made by comp for the motor. The engine also has the comp pro-magnum roller rockers. Today I order the rocker shaft stud kit from Hughes and going to replace the rocker shaft bolts with studs. Comp does not even know what to set the pre-load at...

My 383 for my 68 charger has a comp hyd. roller cam and lifters. About four hours on the fresh motor the lifters crapped out, The engine builder sent them back to Comp and they sent a new set, they would not give him a reason as to why they failed they just kept saying we will send another set...

My brother has run a couple of quick fuels with good luck. For my 68 charger I had pro systems carbs build one for my motor. Gave them all the specs on my 383 build, tranny, gear ratio, exhaust size what brand and octane fuel would be in it and how the car would be used. The carb runs great and...

I have been thinking about calling Petty for the spindles and hubs . I am going to radius and flare / pull the fenders out and pull out the quarters like these.

Mine is a 4 speed, black top, green interior and white transverse stripe. What is yours?