Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All metal brake lines and rubber brake are brand new
I ended up replacing both front calipers and the master cylinder. (the first set calipers and master cylinder were new). But I replaced them both.
I did bench bleed the master cylinder very well and installed it and two new calipers.
When...
I'll try the disconnecting the line at the proportion valve and make sure that there are no obstruction
Also the second master cylinder was just installed. I bench bleed the master cylinder and exercised close to 30 times to make that there was no air in the master cylinder
Installed new calipers installed
Installed new master cylinder
Try to gravity bleed right caliper. No fluid comes out
Then removed right right rubber hose that's between the metal brake line and caliper and installed a clear hose on the metal brake line
I try to suck the clear hose trying to...
This is a front drum to disk conversion
ALL New brake lines
All new brakes pads
ALL Rear wheel cylinders
New master cylinder
New power booster
New front calipers
Drums are turned
Front rotors are new
The master cylinder filled to top
Pedal feel, pedal does have resistance but still goes to...
Little background
ALL New brake lines
ALL Rear wheel cylinders
New master cylinder
New power booster
New front calipers
The master cylinder filled to top
Pedal feel, pedal does have resistance but still goes to the floor?
Also, it feels like the brakes are not releasing .
Example when I'm...
The complete brake system is new. Were you talking about the rubber slinky type tube that is around the rod that would connect to the pedal mechanism?
Should I remove rubber tube piece if it's still on back of the brake booster?
Or is it a bad booster ? Or the rod is too short? Or To long ???
70 super bee power booster, puffs air noise when I apply brakes.
When I apply the brakes slowly I do not get the air puff noise .
The hole brake system is brand new. Brakes are bled multiple times. Pedal feels OK maybe a slightly low pedal.
Fronts are disc/rear drum
Any clues on why this may...
Good morning John
I just saw your price on your board underneath the roller $40 much for shipping to
What is it? I will go over here huh? And then can't come around
53 Love Creek tractor in a truck not all of itDr., Lewes, DE 19958
Hi john
Thank you for writing back regarding the quarter window track roller. I need one roller. How much do you want for your roller plus shipping? What type of payment. Check PayPal? My shipping address is:
Jim Cloman
53 Love Creek Drive
Lewes Delaware 19958
again thank you for your help...
Hi Rick,
You have the left and right bar?
If so, how much are you asking for both.
Jim cloman
Lewes Delaware 19958
Please read the rules for posting ads. Adding personal info like your address and phone number isn't allowed. Thanks
I'm in need of a b body 1968 1969 1970 dodge super bee, looking for a passenger and driver side inside door bar that connects the door handle.
----------Please See photo -----
Thank you for the help