• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    dana 60

    Going to use the 8 3/4 out of the sat that I'm working on. If anyone is interested in the dana shoot me a PM. I live in S.W. MI near South Bend IN. This will be pickup only , no shipping. I'll through in all 4 rims and tires for the right price.
  3. C

    dana 60

    Pulled the cover, under one of the bolts was a tag stamped 5.13 and it has a spool. Not much good for a street car. Going to look for a 8 3/4 rearend . I could buy dot tires and a posi for it but I would have as much in it as buying a used 8 3/4 and I already have new rims and tires.
  4. C

    dana 60

    Looks like its about 52.5" from the flange where the brake backing plate mounts. The tires clear the frame rails by about 3/4 " on each side. I'll take some pics once I find my camera. - - - Updated - - - pics
  5. C

    dana 60

    Just bought a '71 RR that was set up as a race car early in its life. Car has no rust except the bottom inside lip of the trunk lid. The problem I have is the car has a narrowed dana under it with 31-14 X 15 racing slicks. No leaf springs, has coilover shocks. Can the existing axle tubes be...
  6. C

    '71 z-bar pivot mount

    The car is gutted atm while I am changing it over. Spent a few $$$ at brewers. I'll look for a notch, thanks.
  8. C

    '71 z-bar pivot mount

    I have a '71 satellite that I am converting from 318 auto to 440 4-speed . I have a rough location where the z-bar bracket is welded to the frame but was hoping someone has some location dimension so I get it right . Worst case I can fit the motor and bellhousing in the car to get the proper...
Back
Top