Search results for query: *

Awesome. Thank you much for taking the time to do this.

My guess is they were the same size as the bezel. If you could check that would be much appreciated!

The washers I have fall into the chrome spacer and are made for a Coronet that sit under the crank and keeps the crank from wearing thru the vinyl.

Does the black washer hang out slightly over the chrome spacer to keep the spacer from rubbing the door panel?

Can anyone confirm if an anti scuff washer goes in behind the chrome spacer on 66/67 Chargers.

This is the spacer I'm referring too. If the black washer you showed is for a Coronet handle, it falls into the chrome spacer and is not the right one.

Anyone know if there is a black washer used behind the window crank chrome spacer, and is it slightly larger than the chrome spacer to prevent contacting the door panel? Thanks

I just checked PG Classic. Expensive! But... the boot on the front floor retractors are correct, where as all other remans I've seen are not like stock. Non-stock Stock

Good morning Mopar fans. During the re-dye of my seat belts for a 67 R/T, I decided the rusted buckles aren't going to cut it against a brand new interior, so looking to purchase OER. I'm undecided between Classic Industries and Seat Belts Plus... not having the products in-hand to eval the...

I'm having console shift linkage adjustment issues on my 440/727, and wondering if it's because I'm using the linkage from the prior 273/904 down to the 727 shift lever. I adjust it per the manual for park/park and the linkage won't go into manual 1st. Adjust in neutral and I have both park...

ok...decided to scrap the 6 way idea. I'm the only one who will ever drive it, so I'll just shim to taste. PG says slight mods required for the 68/68 on 67 buckets. My floor/buck mount measurements indicate they bolt right in. Anyone have experience with the PG Classic repros? Read somewhere...

Confirmed 25% until the 19th. Thanks for the heads up...saves a few $$$$

PG Classic has a 68-69 set for $445. Drivers 6 way is $675 (ouch!) Pass side non adj is $235 Total just south of $900 Anyone see, touch, try PGs? Thanks for the 5th Ave reference. Price is around $250 on Flea Bay. 3 switches. I read mid 80's Mustang w/ joy stick works too...just not sure on...

I thought 67-69 were the same. Thanks for clarifying!

The 6 way is on my wish list, but in the event I can't find the 6 way, will a 68/69 track assembly fit the seats?

Good morning mopar fans, I'm in the long overdue process of restoring the interior of a 1967 Dodge R/T. When removing the bucket seats, I found the seat tracks are pretty rusty so rather than disassemble and repaint, I am looking for replacement options first. Read a ton of great info here and...

Still looking for a set in either good condition or can be repaired. Any pcs or leads appreciated. Thanks

Hi, I know I'm late to the party, but if you still have the pearl white med's, I'll take them. Thanks

I assisted a young pup at Town Fair Tire too align my 67 Dodge on their Hunter. Took the final spec sheet and verified the measurements on my pair of Fastrax...one on each side. Once the car was leveled I was able to obtain the same measurements. Now I can align all my own cars with confidence...