Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It was the ECU box that malfunctioned. Event he original one that worked when i took it off failed when i plugged it in again.
Whats wrong with having the coil mounted on the intake?
I had a stock black ignition box, swapped out to the ignition kit from FBO (www.4secondsflat.com) then it only lasted a year or so, even with a "New" voltage reg from there. After this i put all new Mopar Performance parts in and the cars sounds and runs better. I really don't think I'll run...
I thought i replied on here awhile ago. Turns out it was the ECU. My neighbor came over with a Mechanics electrical tested and mapped everything out. Said it had to be the ECU so i bought a Mopar perf one and she fired up no problems and sounded stronger...Can't describe it but i was getting a...
I thought i replied on here awhile ago. Turns out it was the ECU. My neighbor came over with a Mechanics electrical tested and mapped everything out. Said it had to be the ECU so i bought a Mopar perf one and she fired up no problems and sounded stronger...Can't describe it but i was getting a...
Sorry haven't had much time down there. I do have a hissing noise when i pop the fuel tank lid open.
I don't think its a fuel issue because i've watched the carb (breather off) draw in fuel while running and the floats are adjusted. The fuel filter is clean and the fuel pump is a mechanical...
I figured I would try to get some people opinions on why a 1974 Charger wont stay running when she heats up?
Seat belt interlock is removed and hasn't been an issue since removed.
360ci, 650cfm holley double pumper.
Hey, got the car running for about 1 min then it just wants to shut off.
I had to get my friend over with a mechanics multi-meter. It can map all the voltage and to show you whats getting a signal and whats not doing anything (like the dist pick-up coil ) anywayswe tried two ECU's and we're...
I checked my bulkhead connectors today and the power feed from battery and alt looks alittle burnt. I still get power through into the dash, but could this cause it to not fire up?
Went out and checked everything again today and everything checks out good... Been reading forums/threads and everything about ignition systems and I still can't get this thing to fire up.
Is there anything that i'm missing?
I'm having problems figuring out a short in my ignition system.
Wondering if someone could help me out or get me going in the right direction.
How can I check to see if the Distributer pick-up coil is good? I know when cranking it should send a signal, but how much? Will a ohm test show its...
Had a few minutes to play with the car and figured i'd check the ECU connector for power and return power from the distributer. ECU is a 4 pin design (pin #3 gone on the 5 pin design) I have power at two pins except the two wired that go to the distributer. When cranking the engine i get a 0.02V...
I went out and checked my Dist pick-up and it ohm'd ok but when i crankeed the engine i didn't get any reading. I popped in another dist coil pick and this one checks out but I still don't have any spark at coil... I checked this with the battery on a "start" Jumper that was feeding 14V so i...
I don't have any time to mess today but i went out and checked some voltage readings.
All on Run position
Battery -11.66
Ballast - Blue wire - 10.93, Brown wire -10.88
Coil - + 10.88, - 10.88
Interior - 11.64
Alternator - Black wire 11.06
Fuse link by Starter Relay -11.64
I'll try to...
I've got another Voltage regulator i'll pop on today. Just curious but i put a ground strap on the voltage regulator bolt to the trans, this wont have any effect will it?
Also I've swapped out to a good ECU and same thing ( No coil Spark). I've put a jumped from battery to coil + and it still...
I've checked the power under dash in "run" and get 11.89V (same as battery power). I measured this at the stock ampmeter and on booth red (battery) and Black (alt) feed lines. I have power to interior lights, dash lights, accesory gauges, exterior lights.
All fuses are good.
Engine bay- I've...