Search results for query: *

Hi, I’m looking for rear bumper brackets for my 1966 Satellite. Seems my car had an accident at some point in its life and the bracket on one side is out of shape such that the bumper is closer to the body on that side as compared to the other.

Are the rear bumper brackets on a 66 Satellite interchangeable with any other years or models?

Hello all, A few months ago I replaced the transmission cooling lines and the filter (and gasket) on my 727 tf transmission. After I did so the transmission didn't shift so well at first though it seemed okay after a few drives. The car (66 Satellite) has been put away for the winter though I...

I have to replace a freeze plug and I have a question: the replacement one I have is the correct diameter but it's depth is slightly more than the plug it is replacing. I'm not sure the edge will sit flush with the edge of the hole in the block. It's a 318 and the hole is passenger side, closest...

This is a photo from a 73 Charger for sale on Craigs for 2500. Looks like it needs some work and the seller doesn't list too much info. The speedo in the car goes up to 150 so I figure it has a big block but don't know.

Just wondering who carries Transtar paints? I can't seem to find a local shop or dealer that does.

What's the consensus on mixing brands (different primer and paint), is it bad to do? Do some paints not work with some primers? Just wondering because I'm having the doors on a project soda blasted and the guy doing them said he would prime them too. He is going to use Transtar. Will I have a...

Just wanted to get some opinions on how to correct a low spot on a patch panel welded in to a project car I'm working on (1959 Edsel). I did google the question and noted some info from other sites and forums, but I wanted to get some feedback here too. The low spot isn't too bad, slightly...

It was the night before Christmas and all through the garage Not a creature was stirring not even my Dodge. The tires were hung on the bumper with care In hopes that St, Nicholas will fill them with air. The engine was tucked, all snug in it's bed While visions of Spark Plugs danced in...

Does anybody really care what Dennis Rodman is doing?

Just wondering how much does it cost to have a block magnafluxed (if that's what it's called). When I bought my Satellite, the seller gave me a 383 engine with it. I took it apart with the intention of having it rebuilt and installed in my car but I'm going to keep the 318 and beef it up with...

I myself won't mind if mopar muscle car prices come back down to earth. http://autos.yahoo.com/news/rm-330-000-superbird-happened-muscle-car-prices-213153926.html

http://www.foxnews.com/leisure/2013/11/06/dodge-brings-back-shaker-hood-on-challenger-muscle-car/?intcmp=features

Just wondering what kind of license plates you guys have. I currently have plates designating my car as antique. I have these on all three of my cars. Recently while on the DMV website, I noticed a tab for "Preferred Plates". This allows you to submit a request for the plate you prefer, not to...

First time I've heard of this happening. Makes me wonder what kind of security they had. http://autos.yahoo.com/blogs/motoramic/thieves-swipe-four-classic-chevys-during-monterey-auctions-215019062.html

A couple of paint questions: Which type urethane or enamel? I believe hardener is to assist with drying, but what is the reducer used for? Which type of reducer: Fast, medium or slow? Or Fast 0 VOC, Med 0 VOC or Slow 0 VOC? What is the difference?

Has this ever happened to you: Unfortunately I haven't driven or done anything with my Satellite this summer. I have been acquiring parts for the engine rebuild however. Anyway, I decided to go where it is stored and take it for a ride. It started up after a few tries, but when I put it in...

Is it okay to use a power sander on the car's sheetmetal? If so, what sander would you recommend? Would you use the sander to sand/smooth filler or would you do that by hand with a block sander? Would you use a power sander to sand old paint to "rough it" for new paint?

I bought a polyester primer/surfacer (Eastwood Contour) which came with a couple of tubes of hardener. I have been unable to find instructions on how much to mix. I've even looked on their website. The only thing the instructions say is "Mix 5% by weight". How do I do that? Has anyone else used...

Hi all, just wondering what recommendations anyone may have for a filter system for using an air compressor for painting. I've been looking at the systems that Eastwood has but was wondering what you are using.