Search results for query: *

installed a March serpentine siystem with single wire alt on a 440 6pak. I’ve been told that the voltage regulator is not needed? My problem is my battery is not charging. Alt is producing 14.7 volts but it’s not getting to the battery. I’ve been told that I need to route a wire directly from...

Will do! And many thanks. Plugged vacuum advance and set at 32. I am very appreciative of your knowledge and willingness to share it! Now I need to assemble the rest of the car and take it on the road to see how she feels.

b got of Bill, thank you! Would that be 36 max with vac advance plugged?

Ok, great info and I have all those correct now. T I discovered the advance port on the center carb was loose and could be pulled out. I sealed it but now that it will idle I cannot seem to advance the timing no matter how far I rotate the distributor. I can retardation it to the point of...

You guys were dead on! Capped all vacuum ports and engine now idles fine. Please look at photos and let me know if vacuum connections are correct if you would. On the larger hose looped from bottom of carburetor to top I have seen a numb Uber of different ways. Also I have my PCV hooked up to...

Bill, diaphragms barely move and I am sucking mostly air from somewhere? Little or no resistance

Just a question on this possible vacuum leak, if I draw on the vacuum line that is T’d to the outboard carbs should I draw air or just the vacuum diaphragms that operate those carbs?

Looking for some direction on my 6 pack carburetors. Just installed motor after sitting for 6 months. Came out of an RR and was running fine when pulled. I cannot get the motor to idle under 2100 RPM, it just stalls out. Checked fuel level in bowl and its is fine. Am I looking at a center carb...