Search results for query: *

Purchased here and never used $250 sipped $200 local pickup (from ad I purchased from) Edelbrock CH4B aluminum intake for RB (413/426/440) wedge engines. Good shape. The CH4B is no longer produced, but is sought after because it was basically an updated, aluminum version of the factory cast...

Are you willing to ship? Any idea what cam? Will a ch4b work on it? Sorry for the questions, maybe I should have sent a pm :)

Thanks everyone

Is being a gold member and having access to the blue forum not enough? :rolleyes:

Here is a vid of the exhaust http://www.govbt.com/pics/VID_20181015_192311.mp4 Engine has pcv valve installed and had a rebuild in the 90's around 20k miles ago

It does not have idle issues until it's been driven for awhile . It tends to lose rpm slowly at a stoplight light if that makes sense. If I put it in neutral it will usually pick back up.

One thing I did learn from this is that if your arm is on the positive battery post and you touch the engine you are in for a surprise :eek: Engine seems to run fine except for the blow by http://pics.govbt.com/pics/VID_20181011_154242.mp4 I just remembered I have the tester for gasses in the...

I had a hard time getting the compression tester screwed in while the engine was cold. If i did it while the engine was warm I would probably need asbestos skin :D I appreciate the suggestions and advice so far. I don't have a leak down gauge, I will see if I can get one at the autopart store

Engine was cold and I assume the throttle plate were closed

Cyls #1 and 2 are the low ones. the front cyl on each bank

cyl 1 60psi cyl 2 90psi basically all the others were 145-150 this is a 440 btw, guess its time to start weighing my options Anyone know a good engine builder for complete engines :P

This is what arrived today . With my limited knowledge it looks ok

Yes, I have one arriving this week

Here is what I have now. Being new and all I was wondering if someone can help me with what parts I need to order to make this correct. I appreciate the help

Thanksfor these, very clear. What a clean engine, nice!

Coopers installed thanks for the help

Prayers to you and your wife. I recently went through a scare myself. I second the advice of the mayo clinic in Rochester . I flew there from Tampa and it was the best decision I ever made. Stay strong! I hope for the best

Thank you

your inbox is full

So I purchased what I hope is the correct carb for my 67 GTX. Can someone please help me as to what parts I need to set up the throttle cable and the kickdown? I currently have a 1407 edelbrock on there and I don't think the linkage transfers Does anyone have pictures on how a correctsetup...