Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good thinking, I did just do the rear axle bearings. After a long drive and experimenting, it looks like the vibe is the same whether coasting in neutral or full power... I know the driveshaft is still spinning either way but now I am thinking about possible tire imbalance.
Found the issue, stupid me I was measuring the transmission angle using the pan.. turns out the pan and valve body are not parallel to output shaft.. by 6 degrees. The actual angle, measured at the rear pad, was nose up by 1 degree. With the rake of the car, that is exactly what is normal. With...
Just measured, centerline of crank is correct 5-1/4" above top of k-member. So... the transmission mount is too tall? The beer math says decreasing the transmission angle from 5 to zero would require a 2.5" drop of the rear mount... this isn't even possible with the tail shaft sitting 1.5" above...
The transmission angle surprised me as well. Car had a very poorly done 318 to 360 swap, I have had to correct nearly everything from throttle brackets to kickdown operation to hardware used... maybe wrong motor mounts? I have never had any clearance issues with exhaust, and the fan appears...
Friends,
I am working through driveability improvements with the car and need some opinions on correcting pinion angle. I have caltracs and a higher-than stock ride height on my '67 satellite, which of course has changed driveline angles. At rest with weight on the wheels, transmission is...
Thanks for the advice, makes good sense. However, i swapped the whole interior into red, and if i did ever have to sell the car, it would likely be for less than a third of what i have into it, because it is a restomod, not original anything, and i drive it quite a bit.
But point well taken...
2 door, 1967 Satellite pearl white western scroll interior parts.
Finally got to unwrapping all this stuff from winter storage and posting pictures. Swapped interiors to met red in my Satellite and selling what's left. All stored indoors, climate controlled never wet or in sun.
$2200 for...
Im not a mopar trader, I only have this one car and will probably have it forever. So I don't have much frame of reference for what is a fair price vs gouging people. I searched for bucket seats sold on the forum and it seems like they are a fairly desirable item. A lot of beat up ones though...
Neither... I prefer Pertronix. Replaces the points with a simple magnetic trigger. Basically bulletproof. Too hard to find quality condensers and points, plus there is the periodic wear, plus corrosion gets a vote.
I changed interiors in my 67 satellite and have a bunch of stuff in pearl white and very good condition. Eventually I will take photos and place it all for sale. Trying to figure out what reasonable prices are for used interior bits. 2-door rear seat covers, door panels are in good shape...
Thanks all for the help. Set the endplay properly (same way I did first time!) and after a long drive and lots of brake stops, checking brakes temperatures and adjusting, have the brakes balanced nicely. about 180 degrees on the front drums and 160ish on the rear drums after heavy braking. This...