• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Mike meeks

    Should you save old parts or sell them?

    Is that cash manifold a 400 or 440?
  2. Mike meeks

    WTB 440 cast crank balancer wanted

    Sorry it's taking me so long to get back to you. I ended up going with a forged crank and won't need your balancer. Thank you so much for replying quickly
  3. Mike meeks

    WTB 440 cast crank balancer wanted

    Thank you for replying so fast. I'm checking one other place close to home. If I strike out I will take it
  4. Mike meeks

    WTB 440 cast crank balancer wanted

    Looking for mid '70s Cast Crank 440 balancer in good condition thanks Mike
  5. Mike meeks

    SOLD Parting 1973 Dodge Charger ( WH23 Car)

    Hello I'm looking for front spindles and caliper brackets, would you be willing to sell them? Front spindles and caliper brackets?
  6. Mike meeks

    SOLD 1969 Dodge Coronet 500 Parts Car For Sale $2,000

    Hello do you think the instrument cluster is any good?
  7. Mike meeks

    SOLD 68-69 standard dash instrument cluster

    Hello Kyle do you still have the instrument cluster?
  8. Mike meeks

    Coolant pukes out of overflow tube after shut off

    I'm happy that's all it was, my block was a '65 383 with a lot of hard use
  9. Mike meeks

    Coolant pukes out of overflow tube after shut off

    You probably don't want to hear this but I had the same problem and suffered through it for a summer until it got progressively worse to the point I could not drive the car I thought it was a head gasket I pulled the head off replace the gasket it was not the problem what was the problem was...
  10. Mike meeks

    383 running hot

    You can try taking the impeller out of the housing and Tack welding or riveting a plate behind the fins you take a Round Disc the diameter of the impeller then drill a hole in it slightly bigger than the shaft then cut it in half put it on the back side and take it to the blades or drill and...
  11. Mike meeks

    Favorite oil

    Brad penn 40 + comp 159, every oil change or Schaeffer 40 + comp 159
  12. Mike meeks

    Can it be this simple, valve adj. as shown on Hot Rod TV

    The method that 69bee spoke of is the way I was told and shown by Ray Barton when we picked up our hemi hot off the dyno. I use it on all my motors, no problem
  13. Mike meeks

    Just replaced my electronic ignition w/ points, yup.

    Anyone know where to get good points? Napa?
  14. Mike meeks

    Help for new engine

    A high pump is not needed the stock pump is incredible. The best thing you can do is increase capacity of pan, and either increase the internal pickup to 1/2 inch or better yet go the external pickup route. Hv pumps and thick oil. (20/50) kill horsepower. Also ALWAYS use the aftermarket tapered...
  15. Mike meeks

    66 Satellite question, need a quick answer

    Just my opinion but if you are keeping the car and the trunk lid turns out to be the same I would never sell anything, what if you had to go back and buy a new one it's a real pain in the ***
  16. Mike meeks

    Big block power steering pump question

    That makes sense because the big pulley that's on there will make the belt hit the bottom side of the water pump pulley
  17. Mike meeks

    Big block power steering pump question

    Never heard of that one I might try it if I can't get a pulley from someone can't hurt
  18. Mike meeks

    Big block power steering pump question

    Thanks a lot I really appreciate it I will call them
  19. Mike meeks

    Big block power steering pump question

    Thank you very much so there is a difference between a small block pulley and a big block pulley? Also is the big block pulley smaller in diameter because the belt is very close to hitting the water pump pulley on the bottom side
Back
Top