• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. mountain33

    Cam bolts for upper control arm. 1971 RR

    Got answers. AI set me straight on the bolts and how they work
  2. mountain33

    Cam bolts for upper control arm. 1971 RR

    Really have a dumb question. When you install the bolts with the cams on them into the upper control arm. Is there a proper way that the cams need to face? Does the cam (eccentric) have the ability to spin 360* inside the housing for the cam so it doesn't matter or does it only rotate 180*...
  3. mountain33

    Question on adjusting camber

    Checked out video. Very good. Need to buy some tools. Thanks for your help. At least I have a place to start and a understanding of what I need to do
  4. mountain33

    Question on adjusting camber

    Loose power steering box. Need to rebuild or get a new one
  5. mountain33

    Question on adjusting camber

    I was just searching for the spec's. Thanks
  6. mountain33

    Question on adjusting camber

    Radials on the car and both tires on the front are worn equally on the inside edge.
  7. mountain33

    Question on adjusting camber

    The inside of tires are wearing. I had replaced the bushings on the entire front suspension. I brought it to a shop had it aligned. He stated that do to the play in the steering wheel. That he could only get close to the proper settings. Does play in the steering wheel effect alignment? I had...
  8. mountain33

    Time for a show lets see the 71-74's

    Just got back together.
  9. mountain33

    Points or no points? That is the question.

    What year is your hornet? I've been looking for a 73 hornet hatchback x for years.
  10. mountain33

    What is the general opinion of doing a 440 block .060 over?

    At the risk of causing a flurry of responses and I don't know. Is there anything wrong with sleeving a cylinder? I had always thought that was a option
  11. mountain33

    Rick@Laysons "Out of Commission" for a bit....

    I use it as my screen saver. . Lot quicker than explaining why I walk funny
  12. mountain33

    Rick@Laysons "Out of Commission" for a bit....

    Just have some hardware installed. You will feel great. Ok. I'm lying. Good luck with the back
  13. mountain33

    How to force pistons out of 383

    I'm just happy to hear that there is a 17 year old that is into this. You go kid. Best of luck with your build.
  14. mountain33

    ball-joint socket needed

    I bought the socket and got an 1/2 to 3/4 adapter from tractor supply (the adapter) used an old 1/2 breaker bar with a 3' copper pipe ext. Worked fine. Pipe has a little curve but who cares. It worked
  15. mountain33

    Overheating

    It was coming from the weep hole. Replaced the pump. It's still raining since Sunday so haven't been able to check. They say the rain should stop Saturday. I'm hoping to go to my usual show and see what happens. Hopefully it won't overheat and spill it's fluid all over the driveway again.
  16. mountain33

    Overheating

    Ok I think I found something but not sure. It finally stopped raining, well stopped long enough to go out and start looking at the problem. If any. I checked the bottom hose it had a spring in it. So hose was not collapsing. After I ran the car for awhile with no issues. I went inside. My wife...
  17. mountain33

    Overheating

    Thanks again for all the suggestions Will start once the rain stops, hopefully Thursday'. Will post it once I find out the cause. Hey WileE did you want the keys in the glove box too?
  18. mountain33

    Overheating

    But what happens if it overheats on the way to your place? Will be looking for a good home for it eventually. Bones are aching.
  19. mountain33

    Overheating

    thanks for info. figured it would be something like that but wasn't sure
  20. mountain33

    Overheating

    Im going with the fact that you can hear the coolant percolating out like an old coffee pot. Next time probably this weekend. If its not raining. I will take pictures of the gauge before going up driveway and after. Will also record the percolating sound. Will also check to see if it does it...
Back
Top