• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. ykf7b0

    Need help with heads and intake combo

    With hood clearance being the limiting factor and not knowing what compression ratio you currently have but guessing it is a bit low, I'm going to suggest closed chamber heads of whatever brand you choose to bring compression up a bit and a cam with duration @ .050 less than 230 or you will be...
  2. ykf7b0

    If you're depending on zinc to protect your flat tappet?

    I know a lot are running diesel oil in their gas burning engines. Probably all are fine at low rpm daily driving and cruising but those diesel oils are not formulated for higher rpm performance gasoline engines. Just my .02 cents.
  3. ykf7b0

    If you're depending on zinc to protect your flat tappet?

    I just built an engine and went roller. I spent around $700.00 more but I wanted to avoid the tedious flat tappet cam break-in procedure.
  4. ykf7b0

    8 and 3/4 swap

    That should do it.
  5. ykf7b0

    This guy went to great lengths to save his A-12 block…

    The bores look incredibly good, and it seems to me the block was standing in dirt and mud only on the timing chain/water pump end which accumulated the most crust. His car only has "one" numbers matching engine and this is it. I totally agree with the builder of the A-12 Super Bee for putting...
  6. ykf7b0

    440 CAM

    Yes. Use the Valvoline 10-30 Racing Oil with HIGH ZINC.
  7. ykf7b0

    440 performance

    As you have already saw, you will get many, many opinions on what you should do. So here is mine and from my own experiences. I would definitely install higher compression pistons to work with the better breathing 452 heads because a 440 loves compression. Shoot for as close to 10:1 as possible...
  8. ykf7b0

    Borescope

    That is really impressive! The best I’ve saw for sure!!!
  9. ykf7b0

    Borescope

    Was the picture of the cylinder made with the head off?
  10. ykf7b0

    Checking for Battery drain

    I do this also but I use a test light in series instead of a volt/ohm/amp meter.
  11. ykf7b0

    I'm Questioning My Taste In Automotive Wheels

    I disagree. I think these cars look like they own the road with those taxi cab wheels. I cannot get into this look. Maybe I'm too old?
  12. ykf7b0

    I'm Questioning My Taste In Automotive Wheels

    I really like the black steel wheels on this car better than the oversize rallye wheels pictured below. If this car was mine and these two sets of wheels were my only option, I would bomb can those steelies with a fresh coat of black and roll. Which looks better to you?
  13. ykf7b0

    Friends that you had to let go.

    I guess there are advantages to being born poor southern white trash after all. There wasn't anything to feud over after our parents died. It's just my older brother and myself and I just don't believe anything could have come between us even if we had been born into money.
  14. ykf7b0

    FedEx is now banned from my property - I'm done

    Newgistics now owns DHL.
  15. ykf7b0

    Stop on in for a cup of coffee!

    I’ve never bought a new car but until just recently, I was making payments on a 1955 Bel Air.
  16. ykf7b0

    Hagerty insurance

    I have had JC Taylor on my 69 roadrunner for around 22 years. I have filed one claim involving a teenage girl backing into my car and destroying the passenger door. JC Taylor insurance was more than cooperative and took care of everything making the process easy for me. I now have a policy on...
  17. ykf7b0

    Actors you could never look at the same again...

    Will Smith. After he attacked Chris Rock I haven't watched anything he has participated in including past filming's. Sure, he is a great actor, but I see him differently after his outburst.
  18. ykf7b0

    Actors you could never look at the same again...

    Being that most of the morally corrupt have been mentioned already, I would like to give a shout out to a guy who is legit. Mr. Chuck Norris
  19. ykf7b0

    What is your favorite carry pistol?

    I never leave home without my Glock 43 with TruGlo TFX Pro sights, custom trigger, tungsten guide rod, extended mag, and an extra mag both loaded with quality hollow point rounds. Always concealed carry.
Back
Top