Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A few months ago had my factory A/C serviced and converted to 134. Service included new drier, new low pressure switch, adding Pag oil and fixing leak on schrader valve on compressor head, full evacuation recharge.A/C worked well.
Last week turned it on just to run it, nothing, compressor did...
Getting ready to replace K-frame isolators as well as the isolators on the crossmember. Want to replace the bolts as not sure what shape the originals will be when I extract them.
Anyone has a source for these ( 4 for k-frame 2 for crossmember) been searching to no avail. If anyone has the...
Agreed but hard to see.
Going to put a fiber washer on brass fitting first and observe.
Fuel line observe.
What bothers me is that it NEVER leaked there before.
Just in case been searching for replacement fuel line seems not available anywhere, strange.
I’m a little slow on the update, please explain double flare ? I have a new fiber gasket.
Been poking around looking for new fuel line, any suggestions where to buy?
Found fiber washer, will give it a shot. Puzzling that I never had this problem previously given nothing changed.
Question is did I screw something up in reassembly?
Just FYI, red fiber washer store is Advance auto parts, Dorman kit.
Attached picture of connection ,not that you don’t this from experience. My worry, no frustration, disappointment, is that I somehow screwed something up on reassembly. What’s puzzling to me is that it started right up and fast...
Thanks Fran will send photos in the morning.
Leak is where fuel line, steel with flared fitting, screws into carb supply port. Never had a leak at this location before.
Help !
If by chance you’ve see my recent posts I was dealing with an internal fuel, which with advice of many you guys I fixed that problem.I carefully reassembled and put it on the car today. It started right up and fast idle perfect. Checked it and fuel was almost gushing where fuel line...
With the helpful advice and encouragement of you guys, repaired ( fuel bowl leak) my thermoquad, thanks again to all.
But if it acts up think I ready for something brand new. Do not want to change the stock intake, which is a spread bore.
Looking for something that will bolt right up and...
Hi Geoff,
Well it’s done, went together smoothly, all linkage good no binding anywhere. Hope to install Sunday.
Thanks again for all your help and encouragement much appreciated.
Hi Jonas,
Just noticed that my orginal fuel bowl has casting or part number 0-2409-A, while second bowl has number 0-2383-A.
They look identical, but maybe they are slightly different.
Do you have any clue what the numbers mean?
Thanks