• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Loren White

    If you’ve replaced any of the wiring harnesses in your car who did you buy from?

    Year one restorations. You can check Classic Industries as well.
  2. Loren White

    Time for a serpentine belt swap LA 318

    Swap over to the March pulley system. I changed my 72 340 ten years ago to this setup and couldn’t be more pleased. Just two belts and also adds the 7 hp you lose from the v-belt setup.
  3. Loren White

    Holley Sniper and Hyperspark

    No Sir. The Hyperspark system replaces both of those components.
  4. Loren White

    I Finally Did It.....EFI

    OK gentlemen, my install is complete. After dealing with a no start condition which warranted purchasing the Hyperspark system, replacing the stock distributor, removing the ballast resistor, and voltage regulator, and rerouting the fuel return line to the filler tube, I am finally up and...
  5. Loren White

    I Finally Did It.....EFI

    I have the two plug ballast resistor. So I plug into the blue wire?
  6. Loren White

    Holley Sniper EFI systems - Troubleshooting help page

    Can you tell me what my options are for a +12v switched source. I have a 1972 Dodge Charger 340 with electronic ignition.
  7. Loren White

    Holley Sniper EFI systems - Troubleshooting help page

    Can you tell the +12v switched ignition source you used?
  8. Loren White

    I Finally Did It.....EFI

    What +12v switched source did you use. I'm having trouble with that aspect on my install. Car starts and dies.
  9. Loren White

    I Finally Did It.....EFI

    What did you use for the +12v switched source?
  10. Loren White

    I Finally Did It.....EFI

    What did you use for the +12v switched source? I can't seem to find anything in my fusebox that is sufficient.
  11. Loren White

    I Finally Did It.....EFI

    What +12v source did you hook the pink wire to? I'm having trouble with my install. The car starts and dies indicating the system is not synching and there is no RPM to read.
  12. Loren White

    Adding AC to non-AC 72 Charger

    The vintage air kit for a 72 Challenger will work on the 72 Charger firewall. Those two are the same as long as the 72 Charger came with factory air. I installed one on my 72 Rallye 340.
  13. Loren White

    Seat track spring locations

    Anyone have a diagram on how to connect the springs on 72 Dodge Charger bucketseat tracks.
  14. Loren White

    Slap Stick rod adjustment

    All brand new parts from Classic Industries.
  15. Loren White

    Slap Stick rod adjustment

    Is this lever for the 904? I'm asking because I have the stock 727 already installed in my car and if this lever is for the 727 I will be replacing with the same lever. Thanks for the info.
  16. Loren White

    Slap Stick rod adjustment

    I have that but there are no adjustment procedures.
  17. Loren White

    Slap Stik shifter parts

    Classic industries has the replacement parts you need. Top plate, shifter indicator, black plate.
  18. Loren White

    Slap Stick rod adjustment

    I need advice on the rod adjustment for the slapstik shifter. I have a 72 Dodge Charger, 340 with 727 transmission. What is the secret to obtain full park and full low gear achievment?
  19. Loren White

    Lower cowl rust repair

    Classic Muscle Metal in Cleveland Georgia repaired mine along with replacing both rear quarter panels.
  20. Loren White

    Comment by 'Loren White' in item 'mauidawn1 1972 Dodge Charger'

    The motor is the original 340, and the trans is the original 727. Both have been rebuilt. I added swivel bucket seats and the floor console. Currently under restoration.
Back
Top