Search results for query: *

Very interesting... I'll see what they come up with...because what I have isn't working! :-/

I will be calling them on Monday. This is an all-inclusive kit, supposedly made to fit my application...but I've already had to exchange some of the bolts that were wrong... So, I'm skeptical... Thank you!

With this kit, it appear the shims will adjust the height of the caliper in relation to the rotor, but not the caliper side-to-side. And it's seriously like 1/8" off at most - a matter of too much material (adding shims to the bracket would only make the spacing worse).

Hey all, I'm working on a 72 Satellite with the Qa1 front suspension (K-member and everything). I have the Wilwood 12.8" front disc brake kit. Anyway...I cannot get the caliper successfully centered and mounted. It appears that the rotor is slightly off-center in the caliper - which of...

Nice! Good to know! Thank you. Did you have to remove the oil cooler? Or are you still running that too?

Hey all - I know this has been asked before, but I can't seem to find the post. I'm working on a 72 Satellite with the Qa1 K member with rack and pinion. Hopefully in the coming months, I'll be test fitting my 6.4 hemi, and I'm wondering if the 45 degree oil filter adapter is necessary with the...

Kinda what I'm planning... I want to get the suspension mocked up, remove, and then undercoat.

Good point. Yeah, I'll be running 3" TTI exhaust. Sounds like it's coming out! Thanks again!

"In some vehicles"... I was just hoping to hear from someone who has done it on a 71-74 b body and see what they experienced. If I need to remove it, I want to do so before undercoating.

Thank you! I'm using a Strange 60 axle. The instructions were just a little ambiguous and I wanted to hear from someone who has done it before I go undercoating the car. Thank you!

I'm working on a 72 Satellite - installing the QA1 coilover conversion front and back. I'm sure I will have questions for anyone who has done this along the way! My first question, for anyone who has done this, is it necessary to cut out the original rear shock mounting bracket, or will the...

What combo did you use? On what car?

Just so I'm 100% clear... The stock exhaust will fit with the gerst? Can I ask what you did for transmission, starter, and front accessory drive?

Do you have the qa1 coilover conversion? And am I right in assuming the stock headers or manifolds don't clear?

Hey all, I'm getting ready to drop a 392 hemi into my 72 Satellite with a Qa1 front coilover conversion kit. I have the Qa1 gen 3 motor mounts. According to Qa1, tti headers are recommended, but they don't say anything about the motor mounts and i know tti recommends theirs with their headers...

Has anyone had success with certain aftermarket/ universal switches?

Those who have the Classic dash rallye gauge cluster/ insert...what are you using for a headlight and wiper switch? If using original...how did you go about mounting them? I just got my insert, I'm a little perplexed and any insight is greatly appreciated. Thank you!

Thank you!

Thank you so much! It's appreciated.