• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: Middy
  • Order by date
  1. Middy

    Looking for a switched constant 12V wire

    Just letting you all know, I spliced Ign. 1, and Ign. 2 together and hooked to the MSD Ign. wire and she fired right up and kept running!! Thanks for the help!!
  2. Few pictures of Middy's 69 Roadrunner

    Few pictures of Middy's 69 Roadrunner

  3. Middy

    Looking for a switched constant 12V wire

    Yes, that is correct, just needed the idea to splice Ign. 1 & Ign. 2 together! Thanks for the info.
  4. Middy

    Looking for a switched constant 12V wire

    Thanks for the diagram! I won't be able to try this until Tues., or Wed., but I can't wait!
  5. Middy

    Looking for a switched constant 12V wire

    I get the splicing Ign. 1 & Ign. 2 together but the pink wires in the painless wiring harness go to lights, dome lights, etc., so that's not right for what I have. Can I splice the two together and run a single wire to the MSD box? If so should I put a fuse inline of the single wire running to...
  6. Middy

    Looking for a switched constant 12V wire

    I just installed a new MSD ignition, 6AL ignition box, distributor, and coil on my 69 Roadrunner. I am have a hard time finding a constant 12V wire to power the ignition box. All wires I put a volt meter on either drops to 9V or less when cranking, or show 12V when cranking then voltage drop...
  7. Middy

    Old new guy

    Hi, I go by Middy and joined the forum in March, got distracted and haven't been back. I live in Georgia and I have a 69 Roadrunner with a 440 that I slowly work on (always something to work on with it). Looking forward to picking your brains! Sorry for the delay!
Back
Top