Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So it might be the used kickdown band need a new one yes the first one had pieces of friction material in the pan the used one not enough friction material on it ....but under hard acceleration I put handle of cable right on my ratchet shifter handle so can operate it with shifter hand on hard...
Mostly 2nd to 3rd when push on gas comes out of gear let off goes back in when going slow but in driveway pushing hard in I guess first gear pulls hard and in reverse its the 2nd to 3rd slips out jumps from 2nd to 3rd then back for about 5 or 6 years the kick down linkage replaced with a choke...
It has power grabs real good in reverse and drive in my driveway but take it out on road still slips out of gear when push accelerator let off goes in to gear what now I adjusted band correctly and when pull back in driveway smell something burning what could that be idk
When I first opened up pan removed valve body front band had play not tight or snug and it worked correctly now when driving I think front band too tight first pulls engine down a little but 2nd to drive slips our engine goes up and down let off accelerate goes in drive but push on gas goes up...
Has reverse but when driving it slips on 2/3 shift goes up down revs up let off gas goes back down in driveway pulls hard in 1 2 3 and reverse but driving does the slip in 2nd 3rd shift on hard acceleration
Tore down whole transmission like have before Time before no issues pulled every gear and reverse the time before I rebuilt transmission replaced clutch packs berings font band too second time did not mess with low reverse band adjustment should be same as before only thing I replaced is front...
Need help with my 904 replaced front input shaft seal and front band goes in 1 2 drive but not reverse did not mess with low rear band setting just front band all works but reverse idk
I need help with my 904 pulls 1st 2nd and drive but no reverse recently changed front imput again seal ans drive gear on pump and the front band but did not touch adjustment on rear bands idk need some advise