• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Race car to Pro street

    Race car to Pro street - Project Speedometer

    Installing a Autometer Pro comp Ultra light 200mph speedometer.Got the bracket made. Painted the bracket.
  3. 68RR440hp

    Comment by '68RR440hp' in item 'Miss Bird is back up and running again!!'

    Looks good.
  4. Race car to Pro street

    Race car to Pro street - Project steering column

    Installing a i did it pro lite steering column with DD shaft with universal joints at both ends. Quick disconnect steering hub and horn button. Painted steering column brackets. .Got a new oil pressure gauge installed.Also the new steering column getting installed soon.Steering column lower...
  5. Race car to Pro street

    Race car to Pro street - Engine compartment

    More sanding more primer then ready for paint. Engine compartment painted..
  6. Race car to Pro street

    Race car to Pro street - Engine compartment

    Scrapped alot of dirt and old paint off of the K member. Got some primer sprayed.
  8. Race car to Pro street

    Race car to Pro street - Engine compartment

    Engine is out now i can prep engine compartment for paint.
  9. 68RR440hp

    Reply to update 'Engine build' by '68RR440hp' on item 'Race car to Pro street'

    Thats alot of Road Runners..
    • 68RR440hp
    • Showcase item update reply
  10. Race car to Pro street

    Race car to Pro street - Engine build

    Getting ready to start a new engine build.Going to run a Aluminum Indy block and run the Indy heads that are on old motor. Lifter broke , bent push rod. Starting to tear old engine apart.Indy 440-1 Cylinder head with 2.25 intake valves.
  11. 68RR440hp

    Reply to update 'Project Headlights.' by '68RR440hp' on item 'Race car to Pro street'

    Hello , my car is tubbed but the rearend is stock length. the wheels are offset to the outside 31x16 x 15. I tubbed my mustang and i installed the rear clip then cut out the wheel wells ,then i put the wheels and tires i wanted under the car and measured the distance then had the rearend narrowed.
    • 68RR440hp
    • Showcase item update reply
  12. Race car to Pro street

    Race car to Pro street - Air filter wrap

    Green wrap
  14. Race car to Pro street

    Race car to Pro street - Alternator

    Got the alternator installed.
  15. 68RR440hp

    Reply to update 'Project Headlights.' by '68RR440hp' on item 'Race car to Pro street'

    Hello , and thanks for checking out my car.. while it is driven on the street it is a Prostreet car. I have 2 cars with 5k stalls and big cams running on 112 octane gas. both cars are on the trailer more than on the street.. have the 5k stall in my mustang since 1998 and never had any problems.
    • 68RR440hp
    • Showcase item update reply
  16. Race car to Pro street

    Race car to Pro street - Project Headlights.

    Got the headlights installed.Also going to make a custom lexan hood scoop.
  17. 68RR440hp

    Comment by '68RR440hp' in item 'Race car to Pro street'

    That's a cool story.
  18. 68RR440hp

    Reply to update 'Dyno tuning' by '68RR440hp' on item 'Race car to Pro street'

    The rear tires are 31x16-15 and yes the car is tubbed.
    • 68RR440hp
    • Showcase item update reply
  20. Race car to Pro street

    Race car to Pro street - Headlight panels.

    Got a pair of headlight panels.
  21. Race car to Pro street

    Race car to Pro street - Dyno tuning

    Dropped the car off at the tuners for some holley carb work and runs on the dyno.
  22. 68RR440hp

    Comment by '68RR440hp' in item 'B body classic hemi installed'

    Nice !
  23. Race car to Pro street

    Race car to Pro street - Trunk

    10 Gallon fuel cell with # 10 an return line. Welded the oil fill cap on the valve cover.
  24. Race car to Pro street

    Race car to Pro street - Race car has 2 batterys and no alternator.

    Project race alternator install. Got the alternator and just ordered the crankshaft pulley and spacer for custom install.
Back
Top