• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Supershafts

    Broken pin in differential

    They are talking about the cross pin, its what the spiders run on
  2. Supershafts

    Nitrous miss/pop at higher rpm

    1. GET a fuel psi gauge NOW before you do more guessing 2. DO NOT retard timing UNLESS you need to 3. If you aren't running the n2o side on it's own dedicated fuel line, then make sure you have a GOOD pump that can handle both the motor and the n2o system. Continue doing what you...
  3. Supershafts

    Looks like it's time for a Dana

    You're below the axles rating, and don't have his 1st gear, you're probably somewhere around 5900 with your 1st, final and hp. Tq twists axles regardless of trans style, and slicks help, drag radials would be harder
  4. Supershafts

    383 Stroker possible Cross Ram

    the 496 is not going to be near its potential with the heads. Just rebuild the motor if all you want is street use
  5. Supershafts

    cam recommendation needed

    Cc 20-712-9
  6. Supershafts

    Looks like it's time for a Dana

    6200, 33 is 8300
  7. Supershafts

    Differential gurus needed

    It's going to be larger.... you have to crush it until you get the right preload
  8. Supershafts

    Looks like it's time for a Dana

    times your hp by 2.87
  9. Supershafts

    400 Stroker Advice!

    What about the rest.... there were 2 questions there What do you want from this ? 13's, 12's, 10's or 14 mpg, 18 mpg, 6 mpg
  10. Supershafts

    Looks like it's time for a Dana

    Look at it like this, you have 600ft even if you have the same 1st i do 2.7 that puts you just over the 30 spl capability by 300 ft. If you have the 2.4 1st you're right on the number and why you aren't having a major break within 2 or 3 passes. At 33 spl and my 1st and my final of 4.8...
  11. Supershafts

    Looks like it's time for a Dana

    The D-60 uses 35 spl axles (cars SF) and still has LS options at 35 spl where other diffs do not and instantly jump to spools. . - - - Updated - - - Eaton, the same company that made the TT you have now in 30 spl. Any custom axle company will make 33 spl, i use MW mostly because...
  12. Supershafts

    Looks like it's time for a Dana

    Why did you build it with new axles and a 30 spl, I would have done the 33 spl and TT. The difference in 30 to 33 spl are 2000 more ft lbs tq capability. If you're going to change axles and traction devices it's always best at that point to go with the largest avail at that time...
  13. Supershafts

    400 Stroker Advice!

    What do you want from this ? 13's, 12's, 10's or 14 mpg, 18 mpg, 6 mpg .
  14. Supershafts

    Looks like it's time for a Dana

    what spline is that ?
  15. Supershafts

    when should whine from rear end become a concern?

    Set up is wrong, or you have bearing issues. Richmond makes noise when they're set up wrong. The only gear sets that have piss poor quality are those that are not lapped or run in, those are usually cheap copy versions or usa standard. Motive/Richmond, US Gear, Precision...
  16. Supershafts

    How much to rebuild an 8.75?

    There is 0.0, NOTHING to make any added strength by not using a crush sleeve.... Neither of those make a difference to strength, there is nothing they could do to add strength. The only thing to add strength are larger studs , steel caps, modified cases, mikroniting...
  17. Supershafts

    Driveline issues

    There are different type spline cuts, what year is the trans and the yoke from ?
  18. Supershafts

    Torker II vs Performer RPM on 493 stroker!

    You can ask about tires and weight and gear and tc all week.... It still will not REACT or have the same issues as a 440. The entire problem here............................................ Because the block or heads are CAST as a 400, 440, 426 or whatever.... you and most BUILD...
  19. Supershafts

    Torker II vs Performer RPM on 493 stroker!

    Why would you bother to build such motor only to lose potential.... The idea you're losing low end and response is not true, unless you're building a 383 or 440 and not making changes to what and why the 383 and 440 respond that way. It's a street car why have a 4 brl ? put a 2 brl...
Back
Top