Search results for query: *

72 with 73 hood

No its a 1972 satellite with a 73 runner hood here is a link to th guy that owns it, scrole down on this page you will see this picture, and you can talk to him to http://www.facebook.com/pages/1971-Plymouth-Roadrunner/98632765422

71 or 72 with 73 or 73 hood

JUST PICKED THIS ONE UP ON EBAY holley 750 double pumper pro form center new dyno tuned

HEY BREEZEE THAT IS ONE AEWSOME CAM !! HERE IT IS , WOW !!! THANKS !! http://www.hughesengines.com/Index/products.php?browse=category&level0=QmlnIEJsb2NrICA0MTMtNDI2LTQ0MCAoUmFpc2VkIERlY2sp&level1=Q2Ftc2hhZnQ=&level2=V2hpcGxhc2ggTXVzY2xlIENhciBjYW1z

Rofl cranky :)

its an original 11inch fly wheel off a 69 383 roadrunner , its for an internaly balanced motor i was told,

66blvee Found the part # BCA bearing FC69907 awesme thanks :) it is a needle bearing inside very nice setup

this motor was rebuil when I picked it up and never ran yet , I rechecked the numbers they are 4 T 440 E 126 crank damper is 1 5/8 inches thick the torque converter I took off has two whieghts on the face of it by the drain plug they are 1 3/8 inches long just over 1/8 inch thick and...

Are you useing this low deck for a 440 motor ? Or do you use the high deck for 440 motor ?

Went to comp cams and sent my spec's and info , takes a couple working days to hear back ,, ill post when i hear back from them what they choose for me, :) Thanks for the great advice ja20

Hi rrunner ,,Thanks good question !! I have an original 11 inch 69 RR big block belhouseing and 11" none balanced flywheel ,, in front of the intake on the 440 is stamped 4 T 440 from what i can come up with i think ? Please help me on this ,,, 4 means 1974 ??? T means...

Hey 66blve , found one,,, them are one nice bearing, needle bearings in them too, you just made things a wholealot easyer thanks!!!!!

picked up a 74 rr big block 4-speed car for the motor,had a rebuilt 440 and a 727 auto behind it, putting the 440 in my 69 and when i pilled off the 727 found that the crank has no pilot hole drilled ??? My luck any and all sugjestions helpfull

Looking for help finding a rough idle cam kit that will make my 440 sound like its beefed to the nuts while iddleing at the pumps my 440 is pretty much stock, is bored 30 over, stock heads, dual plane edelbrock intake,, 750 holly double pumper,, headman headers with cherry bombs ,2 1/2 "...

hi picked up a 74 rr big block 4-speed car for the motor,had a rebuilt 440 and a 727 auto behind it, putting the 440 in my 69 and when i pilled off the 727 found that the crank has no pilot hole drilled ??? My luck :( any and all sugjestions helpfull