Search results for query: *

Milodon Stroker Windage Tray #32005 for BB....The tray is brand new and never run. Used for mock up only and will not work with my oil pan.... $65- Shipped.... Location- NY 12533

1965 Coronet- NSS . 3625 lbs. w/driver 440-.30 over Pistons-TRW flat tops MP-484 Hydraulic Cam 67' 915 Heads- 2.14-1.81 valves (stock steel rockers) M1 single plane intake 850 Holley DP TTI Headers Full 3" exhaust w/crossover and flowmasters 727 Trans. w/reverse manual valve body 9 1/2"...

1965 Coronet 2dr Hdtp- NSS Ok all, it looks like I my have lost the storage for my 65 Coronet street car, so before i leave this car outside for the winter and watch it waste away, I will sell it. I am posting pictures but for more specs on the car you can go to the racers hangout section of...

What's the tightest valve to piston clearance you have run with a HYDRAULIC CAM- (intake and exhaust) Who has gone closest to the edge!!!!!!!

Does anyone know if the cat fluid damper will work with stock pulleys on a BB 440 ?

8 3/4 Posi Rear- 4:56 Gears- (489 case) $450.00 -No Shipping- (must be picked up in N.Y) cash and carry.............

BB Comp Cam- part #23-630-5 solid flat tappet Lift-.650 Duration- 324 Duration @ .050- 290 Crane lifters- part #99259-16 This cam was used for 25 passes in a bracket car. The lifters were removed and marked for the lobe they were on for re-assembly. All in perfect condition. $185.00 plus...

Finally got the new combination back together and fired it up! Hope I can get to the track soon to see if it runs as expected............:3gears:

1967 440 Block- (standard bore)- Block has been cleaned, flushed and washed. It then was externally coated with zinc phosphate metal prep and POR-15 Hemi Orange paint applied. The lifter valley and inside timing cover was coated with glyptol paint to improve oil return. Block is ready to be...

727-11" converter 2800-3000 stall Torque converter for 727- 11" 2800-3000 stall. -(was behind a 440)- Only about 100 street miles and maybe 8 passes at the track. This converter worked great on a street driven car, only reason I'm selling is because I went to a 9 1/2" with higher stall for the...

BB Mopar Performance .590 solid cam and lifters -(used)- excellent condition, very little use. Lifters were packaged and labeled to be reinstalled on the lobes they were removed from. $100. Plus Shipping............

Weiand stage 2 tunnel ram #5987 standard port- two modified 4150 holley 750 double pumpers- fluid filled fuel pressure gauge- twin holley regulators- all russell fittings and braided lines- fully plumbed and ready to bolt on with linkage. This setup works! Went 9.00-10.00 with aluminum heads...

Anyone know of a shop in the NY NJ area with an engine dyno, that is equipped for a BB mopar?

BB 67' 915 Closed Chamber Heads- competition prepped- milled to 72cc- intake side also corrected- 2.14 intake and 1.81 exhaust valves- 3 angle valve job- all manley pro flow valves- extensive port work- PC seals- machined spring pockets for assembled spring height 1.950 springs 120 lbs at seat...

BB Mopar Performance .590 solid cam and lifters-(used) lifters were put in a box and marked for the lobe it was removed from for reassembly...... $150. - plus shipping.....

Anybody think will get any racing in this weekend at the valley? The weather ain't lookin good.........

Never forget and don't forgive!!!!!

Just got back from musclepalooza at lebanon valley dragway, I should of stayed home! Pits were at mess from the aftermath of hurricane Irene-(dust all morning) -then rain right before eliminations, -(humidity you could cut with a knife)- after waiting it cleared up in time to hurt the motor in...

Anyone racing this weekend- Sun. 9/04 at Lebanon Valley Dragway- Hemmings Musclepalooza.......

I'm looking for a fiberglass hood for a 65 coronet, preferably with a superstock scoop.