Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi,
I am driving a 68 Road Runner with 4-speed and 489 rear end, engine is a 440 from 1978 without any modifications. I am planning for a mild stroker (440->505 or 400->470), street use only. Looking at the stroker engines build in this forum, did you also modify the cooling, the gas supply...
Hi,
since the grille of my 68 Road Runner is cracked and cut on several sides I am searching for a grille for the 68 Road Runner to complete my 7-year-bare-to the-metal-restoration.
Thanks,
Thorsten
Hi,
doing a bare to the metal restoration on my 68 Road Runner I started the carpet installation. From several threads in this great forum, I have learned that the accelerator pedal is located in the upper right corner of the heel pad but I could not find any pictures, showing "the rest" of...
Hi,
I am restoring a Plymouth Road Runner 68 and had my grill re-chromed. Now I need to paint it "the cells". Does anybody have detailed pictures which parts of the grill have to be painted? As far as I know, the color was dark gray and not black, right?
Thanks,
Thorsten
Hi,
I am restoring a 68 Road Runner and bought a new dash harness from MH wiring harness (Yearone, Classicindustries, e.g.). Assembling the dash, nearly all connectors to my (non-ralley) dash are fine but for one, the dash harness doesn't fit, even the colors are wrong. I attached a photo of...
Hi,
restoring a 68 Road Runner I had to buy a new turn signal switch. The old connector for the cables on the turn signal switch (the clear one, 10 prong) is really bad. Is there a replacement part?
Thanks,
Thorsten
Hi,
I restore a 68 Plymouth Roadrunner Hardtop. I started assembling the car about four month ago, installed the door hardware and windows but I do not know where these parts belong to and how I need to built them in:
In the shop manual, there are no pictures of the window assembly and on...
Hi,
for the restoration of my 68 Roadrunner, I am searching for some rubber/bumper parts. They are mounted to the top of the front door glass channel at the backside of the vent window frame:
Would be great if someone could help me out on this.
Thanks,
Thorsten
Hi,
I am restoring a 68 Roadrunner Coupe. The door glass runs in the channel of the vent window on the front side. On the top of this channel, there is a rubber/bumper which is screwed to the channel. Does anybody know if this part is available at the part dealers or how it is named?
Thanks...
Hi,
I am searching for a part for my Plymouth Roadrunner 1968. Under the accelerator pedal, there is a linkage I am missing. In the picture, those are the parts marked with a red line.
Regards,
Thorsten
Hi,
I am doing a bare to the metal restoration of a Plymouth Roadrunner, 1968 with a A833, manual steering and floor shifter. Due to a bad timing, I had two years between the disassembly and assembly of my steering column. Everything looks fine and thanks to this forum, I have found nearly all...