Search results for query: *

I'm in the process of installing the factory radio in the dash but I don't have the rear support bracket. Does anybody know the dimensions so I can make one? I just bought a new dash bezel and don't want to risk breaking it with a heavy radio. Also does anyone know the thread pitch on the shaft...

My el seems dim, especially in the ac lighting plate which is barely noticeable. Can hardly see any el lit during the day. I plan to change the dash harness soon as year one runs another 20 percent off sale. But I still suspect some low voltage from the power pack. You guys are the pros and...

Its a lazy sunday comprised of all mopar stuff at the dirt mall. What could be better?

66 charger, but I would imaging that all the b bodies from 66 with ac are the same

Does anybody have a good picture of the guts of the heater control showing the capilary switch installed? Im still trying to determine if mine is missing parts

I saw that pic on the charger source guide. Its a volvo valve but the only difference is the mount. 209 bucks online. Looking at my valve there serms to be parts missing to mount the capilary valve. Like I said the previous hack owner did nothing right so this just adds another chapter to the...

I recently refinished my ac box. As of right now its back in the car and we are trying to get heat. I do not have any of the underhood components for the ac system. They will be purchased this summer. Heres my question. What does the copper tube coming from the heater do? I can see that it...

Ive been looking into refurbing the ac in my 66. Iv seen some guys using a NAPA replacement pn hc205. Anyone use one in their car? It seems like a better option than a 50 year old brittle ebay buy.

http://carnut.com/iown/67chrgr.html I stumbled across this while wasting time on the web. Check out the headlight buckets. I think this is one slick idea. Makes the front look wicked awsome. Perhaps the owner is a member here? What do the rest of yall think? :headbang:

Getting ready for the rebuilt 440 and trans to go back in. Fixed all the stuff the cobbler I bought the car from messed up or just didn't do. Should be done just in time to winterize.

Has anyone bought one of the 600 led setups on ebay? Are they worth using?

Just put in an msd 6al2 box coil and pro billet distributor in my 66. Where does the tach wire go for the factoty tach? Do I hook it up to the sending unit? directly to the tach? Do I need the tach adapter and if so where does that tie in? I called msds tech line but all the guy could tell me...

Thats what I was thinking assuming that you're referring to the lever that sits atop the rod thats inside the console. I'm putting a few extra holes in it to find the right place to make it all work. Thanks. BTW. nice fury

I am trying to install a hurst promatic 2 im trying to mount it inside the console to givet the stock appearance. Im doing all the test fitting in my parts car. So far i have removed the floor brackets and mounted the shifter. The linkge in the console is only six or seven inches long so I see...

Just got done putting mine back together. Doesnt look as awesome as the red and white though.

That rides gonna be too pretty to wanna sit in!

Had an extra piece of carpet leftover from my interior redo so I decided to recover the trunk divider with a mopar logo under the carpet. Its really subtle but looks cool once you notice it. Took lotsa staples to hold it down while the glue set up. Anybody else ever do something like this? Id...

Made up a new trunk divider for my 66 charger. Sorry bout the crappy pic had a hard time getting a decent one. Today I get the bumper back from chrome tomorrow new wheels damn it never ends does it?

I think they look pretty good

You got a pic of the plastic trim clips? I seem to be a little short myself and need something to hold the trim on as well.