Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling factory components from a 1970 Dodge Charger R/T
Rebuilt Lower control arms:
nice and straight, sandblasted and added lower stiffening plates and powder coated black.
Rebuilt upper control arms:
Sandblasted, powder coated, new ball joints and poly bushings from Energy Suspension.
Big...
Sorry no updates lately. Project been on hold due to getting married and building my own house.
But have not given up. Plugged all the wiring harnesses together and started it up shortly before I had to put it on hold. So that was a good feeling. it runs at least!
Modified some srt8 Cherokee...
Got My new radiator, its a Champion 3 core made for a 1970 mustang. fits nicely, with both hoses on the passanger side. Used a upper hose from a 05 300c on the bottom. and modified the bottom hose to work on the top.
I Made the shroud out of a piece of stainless steel.
I'm Back! Its been a busy summer, so the satellite has been on hold. But things are starting to slow down so I'm back to work.
New fuel pumps installed, out of a 06 magnum. Also have the gauges out of a 06 magnum so the:
Fuel gauge works
They will run at the right PSI
No return line, due to...
I have two now. One out of a 05 magnum. Is identical to the 07. But has one additional wire cut. Again all the important stuff is included.
$100 for the 07
$70 for the 05
Sounds like a plan, do you sell a kit for that? Or can you recommend something for that? Then could I just send my tcm to you to have it tuned. For the different speed on the drive shaft?
2007 dodge charger dash wiring harness.
If you are doing a 5.7/6.1 swap and plan on using stock computers you are going to need one of these. Connects all the computers together.
Bought this for my project but I have a 05 ecm and fuse box and wont work. So I need one from a 05 now.
Has...
You may be a answer to our prayers! :hello2:
I think you would do well here. In the process, Do you have a website we could check out? Very interested!
So have you put a nag1 in a custom application before? The 5.7 and nag1 combo uses 2.82 ratio so I was going to get as close as I could to that. Don't they make a 2.76 for the 8 3/4?
I plan on using all factory wiring and computers. Replicating factory rear speed sensors to make the trany work With the 8 3/4 Have not got that far yet I'll let you know when I know how exactly how to do it.
The wheels are billet specialties, qualifiers.17x8 On 245/45/17 BFgoodrich G force...
The oil filter fits. since i cut out the factory motor mounts and mounted the motor a little high for ground clearance. (since i plan on making the car ride pretty low). It fits with absolutely no oil system modifications. That was a pleasant surprise!
And you guys are right i need to rip off...
So here it is. The plan is to get this car up and running by july on a tight budget and do entirely by myself. Its going to be a daily driver. so driveability and gas mileage are priorities.
Here some pics, It fits! with little tunnel modifications and trans shaving. used Speedway universal...
O yeah and i forgot to mention i HATE electrical crap! So im not sure why im doing this swap! I gusss i like the idea of 400 hp and 20+ mpg because this will be my daily driver.So any help with the geeky stuff would be greatly appreciated because I'm computer retarded.
I am also going to put...
So it sounds like i need to install wheel speed sensors to make it work properly. That may take some work, but i'm dedicated in making this nag1 work!
Has anyone on this forum used this trans for this swap? Or anyone at all for that mater? Everyone seems to use the truck trans are just...