Search results for query: *

All, I took Lewtot's advice and went after the air bleed on the affected side and sure enough the top tube sticking out was plugged. Not sure what it was plugged with, but it was much harder than carbon build up, and seemed to be a casting issue. The advance is at 12.5 per the book, as are...

Thanks, I found some of the manuals there and have joined so I can search. The reason I asked about Edelbrock interchangeability was that I see some scaring on both the metering rods and pistons. 50 year old carburetor and all that. So far I found no indication either way. Your idle...

Thanks Mopar 3 B. Surge is in any range from cruise to decel. Rods and springs are assembled correctly, but there are no seal rings. Could you please explain these and where they would go? I assume you are referring to the pistons. I was also wondering if the Edelbrock components are...

Hello, I'm running the stock 4329S on my non-modified 440 Mag. It is very similar to the other AFB's from what I can tell. I just rebuilt it, used solvent, then carb cleaner. (Floats were not even close) However I now have two issues: 1. Accelerator Pump-side idle jet does absolutely...