Search results for query: *

If you run the numbers in a decoder you get this. 400 in a 69 lol Not 100% sure i did it correct. Right to left bottom to top right? : Unknown Unknown Unknown RM21: Unknown Unknown Dodge Main, Hamtramck, MI, USA 7272: Sequence number E63: 400 cid 2 barrel V8 190hp D32: Heavy Duty...

This should help there shouldnt be that many vacuum lines but here is the service manual Section 9 Engine should be some of the stuff you want to know. https://www.mymopar.com/downloads/servicemanuals/1970_Plymouth_Service_Manual.zip

Look up DadsBee one of the most documented and photographed restorations I have ever seen. Different year but most should apply to your 70. https://www.forbbodiesonly.com/moparforum/threads/1969-dodge-super-bee-coupe-restoration.145777/

Here are a few more pictures from when I made the bracket. The arm is factory for the air grabber which typically hooks up to the vacuum actuator. So nothing needs to be modified on the air grabber door and pivoting method. All you need is a bracket like I made and make sure everything has its...

I made this bracket for a I think 2 inch stroke electric piston. If you need I can get the specs on the bracket I made. I went through about 4 different sizes before it ended up painted. I had to adjust the mounting holes a couple times. Fill the holes with weld and move them. But now it works...

Very different than the 69 then.

Google speed nuts or PAL nuts. https://www.ebay.com/itm/223002710811

Check out videos on YouTube for muggyweld.

There is a Satellite near me that has been on craigslist for a long time. Its pretty much gutted however,the frame rails and the actual unibody look to be in decent shape. It does need all of the floor pans but if you don't have to do the frame rails it may save a ton of work. I'll post a link...

That is a ton of work. I would probably go out and buy a few of those spot weld cutters and go to work on the trunk pan. Then work my way around. There are some guys in here that have worked on worse cars and brought them back. Hopefully someone will chime in and give you some direction. I had...

20 bucks

Shows how tough the torsion bar setup is... Pretty cool to watch that car flexout..

Check your neutral safety switch wire on the starter solenoid also check the neutral safety switch plug on the transmission.

It involved a fire hydrant and sleeping at the wheel.

Well damn learn something new every day. I did not know they were mandatory in 69. Apparently I need to get some on the roadrunners buckets. They don't have them. They may not be 69 seats though. I thought they were optional in 69.

shhhhhhhhhhh don't ever speak those words..

So after getting the tach working again in the Road Runner i fire it up and let it sit there and idle cause it sounds good.. lol. Anyhow I notice coolant under the front bumper. WTF? So I pop the hood and see that there is a pissing stream of coolant coming out of one of the cores. The...

Check out this thread. https://www.forbbodiesonly.com/moparforum/threads/best-windshield-gaskets.238272/#post-912148510

I stand corrected. Guess he was too short to reach the peddles. Kevin Hart has reportedly suffered “major back injuries” after his car crashed into a ditch on Sunday, 1 September The 40-year-old actor and comedian was reportedly involved in a car accident on Sunday when one of his classic...

More money than driving skills.. Should have added a roll cage. Nice RR though.