Search results for query: *

I believe the 46RH can be found in early V8 Dakotas and dodge full size vans from the era. 86-96 maybe? I know my Dakota RT had a 46RE which mine was a 1999.

Isn't the 46RH the non electrical version of the A518 pretty sure the 46RE is electronically shifted and the RH is hydraulic is that correct? Below is the 46RH

I'm not sure about the hellcat swap but @Jerry Hall has a few gen 3 hemi swapped vehicles. He may have some insight.

Magnum 5.9 that was in my Dakota R/T was rated at 245 hp. And a little less for every other vehicle they put them in. Truth is though they all got the same 5.9 The Dakota R/T just had a different ECU tune and a little better exhaust. Other than that they were run of the mill Magnums. I did all...

Also the earlier Magnums had a fuel injection TB then later went to the beer barrel style intake with injectors and rails with a 50mm throttle body on the top. This is the later Magnum intake.

I believe they started the magnum engines in 1991? So anything from 1996 to 2002. Vans, trucks and some SUV's.

5.9 magnums are everywhere.. You can swap into a magnum pretty cheap. The only thing you will really need to change is the intake. They can be had from Vans, Trucks, Durangos and a few other things they were put in.

https://www.speedwaymotors.com/Holley-550-1222-Terminator-X-2003-06-Gen-III-Hemi-EV1-Injectors,408399.html?sku=4255501222&utm_matchtype=

Dont forget the gas pedal. I do believe they are drive by wire and you will be needing that.

Here is a good place to start. https://www.holley.com/brands/hooker_blackheart/products/engine_swap_parts/hemi_swap_systems/1966-74_mopar_b-body_gen_iii_hemi_swap_components/

From what I know.. Get a new cam and lifters. Lifters seem to be an issue with 5.7 Hemi's

Why would you.. watch this.

oddly enough it doesnt sag on the stand as much as my 440 did. Looks like the same stand i have. The 440 must be a pig. :)

With that 727 are you going to use an OD unit?

Found a link to a swap.. http://www.hotrod.com/articles/ccrp-0905-hemi-engine-swap-guide/ And picture of the parts mess. I mean parts needed.