Search results for query: *

The one he posted looks like the first one I posted. But the one you posted Don is cheaper and looks identical. Installed one like it in the roadrunner.

https://www.summitracing.com/parts/sum-382009

While not Aluminum these seem to fit very well with the stock shroud. https://www.summitracing.com/parts/sum-382026/make/dodge Brand: Summit Racing Manufacturer's Part Number: SUM-382026 Part Type: Radiators Product Line: Summit Racing™ Classic OEM Radiators Summit Racing Part Number...

You will more than likely need a MSD tach adapter. I had to have one for the road runner because with the sniper alone it was showing 4000 rpm. tach adapter corrected it. https://www.summitracing.com/parts/msd-8920?seid=srese2 The old school tach is analog and the Sniper I think uses square...

Yes

Either one will work.. I used the 8920. 1969 Road Runner factory tach. 8920 8910

Added it to the previous post. MSD 8910 or 8920...

Factory Tachs will not work without the tach adapter. The Hyper Spark puts out square wave tach reference signal. the adapter changes it to analog. otherwise you are running 4k at idle with square wave signal had this issue with the Road Runner tach after installing the Hyper Spark setup. MSD...

If you have a factory tach you will more than likely need to use an MSD Tach adapter to get it to work properly. The Hyper Spark Coil and Distributor hook up to the Hyper Spark Box independent of the original wiring. See the image below. You need 4 wires to hook up the entire system. Fuel pump...

Saw that as I was looking at the 2 cars way different.

AMD now has outer wheel houses for 66 67 Plymouths Belvederes. You would have to check them to make sure. Probably not now that I look at the 2 wheel openings between the Dodge Charger and Plymouth Belvedere. https://www.autometaldirect.com/body-components-outer-wheelhouse-c-23_111.html

Edelbrock DP4b if you can find one. They are close to stock intake size and shape. Probably not the best performer out there but will fit under the hood.

Look at the chart I posted. Not sure if you know where the gear goes but your speedometer cable is connected to it on the driver side of the transmission. Be sure to clock the thing appropriately. The housing that the speedo gear goes into has numbers on it and you have to line them up with the...

Today one of my co-workers came in and told us that he sat down and watched A Few Good Men last night. And without missing a beat I said We don't really care what bar you went to.

And you came to see... Hummm :rofl:

You know the gear ratio all you need to know now is how tall the tire is. Then use the gear chart.

The anodized blue ones always make me think of just shipped stainless steel with that blue protective peel away coating.. lol.

Go here download and print out the schematics for your car. There are only 3 harnesses that are in the engine compartment. Ignition, Headlights and wiper motor. http://www.mymopar.com/index.php?pid=27