Search results for query: *

Thank you

Well, I'm back this weekend working on installing my interior on my 67 Charger that I took apart three years ago and I can't remember where this piece goes. This was in my bag with the rearview mirror. I thought it was mounted under the rear view mirror in the center and looks like it should be...

Thanks for finding this for me, I just bought one. I'll post the results next week.

I have a 67 Charger 4 speed and I have no power at the 30 amp 12v circuit breaker that is screwed onto the footwell next to the parking brake. I took the wires off the post and clean them up and put it back together and I'm not getting anything. Does anybody know who might sell this 30 amp...

My service manual shows the brake switch Part#8-58-60 for a Belvedere and Coronet ( see attached photo) but that claims to not fit a Charger. The Charger has an actuator 8-58-66 , second attached photo from the service manual. I'll take a look under my dash this weekend and see what I have.

Redbeard, I'll look for that as well.

Thank you, I'll take a look for that switch.

Two weeks ago I read on the forum that if I had no brake lights the most likely reason for them not working was the turn signal switch. I had turn signals working and my headlights working. I have replaced all the bulbs in the tail light assembly. When I turn my lights on the rear lights do not...

This was my original reply to a discussion of the rear window molding clips on February 23, 2024: I also have a parts book and I found the part number for the moulding clips: 10 clips#6001 492 and 8 clips # 6001 786. Not sure which are vertical or horizontal BUT I trust Todd's Restorations...

Good morning Jim, I have a few of the original clips (both sizes) that fit the 66-67 Charger rear window( see attached photo). I can mail to you today. Just don't forget me when you get the new ones made. The photo with the dimensions was obtained from another Forum member, when I was looking to...

Thank s for this detail

Thanks for all of the ideas, I bought the complete set for $65 from Performance Car Graphics. Proper size and adhesive. Shout out to 72ls5fla.

That is exactly what I wanted to buy and I just did. I'm a big fan of Mike and I'm glad to hear that he purchased David's business. Much appreciated for the information.

Looking to buy the plastic barrier material and black putty rope to re-assemble my quarter panels. Any suggestions appreciated.

Me too, On Saturday when I was looking for this remote mirror part I found the new front bumper lower splash shield that I couldn't find last month. I had layed it down on a shelf to keep its shape. Oh well, its a bitch getting old.

Bought the clip as well. Thanks

I went through all of my photos and found a photo of my door panel before I removed it. There is the trim piece in place. Thank you rebellion for the photo and thank you bcHO67 for the link.

Thanks for the photo, very helpful.

Thank you for the response, I just bought it. I'll probably find mine a year from now, LOL.

Three years ago, I took apart my 67 Charger and I bagged everything up for my interior. Today I'm finishing up the car and installed the driver side interior door panel and lo and behold I can't find my baggie that has the fastener assembly for the remote mirror cable onto my door panel. Does...