• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1968rt

    68 Charger brake question

    Just got through with the same conversion. I wound up changing the distribution block to a disc brake one and I added the hold off valve to the rear cylinders.
  3. 1968rt

    Power steering issues

    Loosen the two bolts slightly and slide up or down. Be careful when you start it. Too far one way and it will snap to that side taking you hands with it!
  4. 1968rt

    SS spring identification

    That number doesnt look like a SS number. Here is a list.
  5. 1968rt

    72 Charger Steering column rebuild?

    You can rebuild it and replace the bearings.
  6. 1968rt

    The Right stuff/RPI front disc conversion & wheel bearings

    Looks like the brake pad is rubbing on the rotor hub. Brake pads should have a small tab up top to prevent the pad from dropping too low.
  8. 1968rt

    Power Brakes not working

    Did you set the pushrod depth? Need this tool. Setting brake booster pin depth
  9. 1968rt

    1968 Charger R/T Bendix Brake replacement options

    1966-70 Mopar B Body Power Disc Brake Kit w/ OE Bendix Style Power Booster Kit
  10. 1968rt

    Need help w/ 68 charger new rear drum brake install

    I went with the Police" Heavy Duty setup on my 68. No adjuster.
  11. 1968rt

    Steering coupler

    This clip?
  12. 1968rt

    Power Steering Box O rings - source

    Well Im looking for good old USA quality. Most of the hardware stuff is junk.
  14. 1968rt

    Power Steering Box O rings - source

    Looking for these four or five? "O" rings. 1968 box. Dont want to do the hardware store route. Thanks
  15. 1968rt

    Adjustable Proportioning Valve Mounting HELP!

    Is it Ok to mount before the distribution block? I was told it could set off the warning light when the pressure is decreased.
  16. 1968rt

    Master Cylinder hard gasket - boot mount HELP!!

    I dont know what its called, but does anyone repo this part or have a good used one?
  17. 1968rt

    Power Steering Box to K frame bolt size?

    The bolt shown is from the 72. The 68 has the 12pt black anodized.
  18. 1968rt

    Power Steering Box to K frame bolt size?

    These are the bolts that came out of my 72 Charger. They are the same thread size on my 68. Those look like after market bolts.
  20. 1968rt

    Power Steering Box to K frame bolt size?

    I have a very good German tap and die set. Im just missing the correct tap. The welded bolt in the K frame is a little cross threaded.
  21. 1968rt

    Power Steering Box to K frame bolt size?

    I measured it and came up with 1/2" -13 Does this sound correct? I need to chase the thread so I want to buy a tap.
  22. 1968rt

    1973 Dodge Charger Column Rebuild

    https://www.detroitmuscletechnologies.com/mopar-all-62-79-steering-column-bearing-isolator-insulator/?gclid=EAIaIQobChMI4uqC87Sd9AIVmP6zCh1rwg5pEAQYASABEgIOwvD_BwE Im sure they have the lower one also
  23. 1968rt

    Master cylinder plastic plate ID

    Does anyone know what this is called and is it repoed?
  24. 1968rt

    Power Steering Cooler ID

    I was digging through the garage and found this. Any idea what its from?
Back
Top