Search results for query: *

Race was on the South Conduit near JFK airport. I think the $ amount was exaggerated over the years, but it was big money for that time. There were a lot of side bets. We used to go down there all the time. I think this article has some info on it. Brooklyn, NY Infamous Street Racers Back in...

Less than $20 All the parts at home depot.

What cylinder heads are you using. Make sure the fire ring does not overhang the combustion chamber. I heard the early Edlebrocks had this problem.

Yes the book is old, but he's asking about a hydraulic lifter

I think Crane gold rocker use a ball/cup pushrod. stock is ball/ball. You can use the chart as a starting point, but you should get a pushrod length checker.

Mechanical numbers are 4782 & 4783 Fuel inlets are on the drivers side.

Or you can try and find a single 4 bbl top !!

I did the mods on the Weiand and it ran great. I also rounded the entrance to the runners with a slight radius. The angle cut at section AA is important, port 7 was running super lean before the fix. I will try and take some pictures this weekend.

Here is a baffle template I made years ago. Print it onto 8.5x11" paper, glue it on sheet metal, cut and bend as shown and tack weld it in place.

We used to mill the domes off 2295s all the time. They will sit about .050 in the hole with about 9.5 compression.