Search results for query: *

Post 7 is a 1970 non rallye dash....the 70 rallye dash uses the exact same location and switch for rear defog or convertible top (see below) . 1969 B bodies also use this switch location. 1968 rallye dash included the rear defog or convertible top switch in instrument cluster. This was the only...

Rear defogger/conv top switch on 70 B body is mounted to left of heater control. Not mounted in this 68 only location.

That looks like the correct 69 GB liner to me. The 70 liner has a removable FB cover. The 69 folds down like that. The fuse box mounts on the black bracket in middle of square opening. It mounts behind the bracket....not in front. The screw goes through bracket and into plastic fuse box.

Pretty sure you will find those are the PG Classic Chinese repops. Several people are quite happy with them. I can't say.

IMO PUI are not near the quality of legendary.

Vacuum Ornametal out of Romulus Michigan restores them to original type chrome finish. Address: 11380 Harrison St, Romulus, MI 48174 Hours: Open ⋅ Closes 4 PM Phone: (734) 941-9100

I can assist with your radio resto/upgrade as well as the speaker resto. Send me a PM for more info. Joe

Sorry to see you have found out the hard way. That stuff is horrible....you can spot it from a mile away. Check out Instrument Specialties for restoration of your originals. Not cheap (approximately $1300)...but excellent work. Photo one below is my Charger....photos 2-4 are recent customers...

Have yours restored by Vacuum Orna-metal out of Romulus Michigan. Vacuum Orna-Metal 11380 Harrison Romulus, MI 48174 Toll Free 1-800-827-6762 Welcome to Vacuum Orna-Metal | Vacuum Orna-Metal

Feel free to message me re: your 8 track radio needs. I have several restored units on hand. Joe

Yes...you have a repop. Not sure what to say other than that is unacceptable for fit.

If it is a gray wire it goes to clock.....if brown it goes to wiper or washer switch

SEM Landau black is what is used by Vacuum Ornametal on their restorations. This is what I have been using as well.

I can possibly assist as well. PM me for more info. Joe

yes it is.....

The textured organisol was used on exterior items like hood stripes & scoops. This is not the correct interior paint. It may work but is not technically correct.

Try TCP Global. They can mix factory style and color paint for your dash. Restoration Shop OEM Paint Mix Type C

One time use staked over the large washer. I took a dremel and ground off the staked over button. I then used an epoxy to re-attach.

Those repop clips are useless...yet the vendors keep selling them to unsuspecting buyers. Hard to believe this is still going on. Been a known issue for quite some time.

This was the case on 68 B bodies. 69 & 70 B body the fuses are accessed thru glove box as photos above show.