Search results for query: *

Check out Muscle Car Restorations in Chippewa Falls. They have a good website that shows a lot of "in progress" photos. They have an acid bath and also an option to have the whole car dip primed after it has been in the acid bath. Their website is: www.musclecarrestorations.com Hope...

B-5 has always been a favorite of mine. I'm thinking about painting my 73 Challenger that color when the time comes. Post up some photos of your E body Donny. Thanks. - - - Updated - - - I've found paint chip color charts that show the difference. Like you said little things like the...

You could always go to your paint jobber and just ask for plain old white base maker with nothing added to it. I'm talking about the straight up white material that is used in making other paint formulas. It doesn't get any brighter or whiter than that. Just a thought.

I used an AMD one piece floor pan in the last Duster I restored a few years ago. The fit and quality was very good. I have never had any major problems with their stuff, and I still believe they are the best on the market. I see what you are talking about with the roof panel though. Good luck...

Oven cleaner I understand your concern with the grill since they are getting hard to obtain. Try the oven cleaner in a small inconspicuous spot and see how you like it. I would be more concerned about damaging the plastic and affecting paint adhesion using brake fluid..... I have used the...

Easy off Oven Cleaner Works............. Try Easy Off oven cleaner. Get the blue can it will work better. Spray it on and let it set for about 15 minutes. It will foam up a little. While it is still wet, take a tooth brush and gently scrub the plastic. Most of the paint will come off this...

Warm and raining in the camp today, Herr Kolonel...... Lol

Auto "correct"..... Right!!! Damned auto correct!!!!! " I see nothing, nothing Col. Hogan!!" It should have been shutz. My bad I didn't even catch it. I just tried out another 3M product on the bottom of my Duster. I used it on the rear wheel well area and just behind it where...

I used 3M body Schultz. It can be sprayed over pretty much anything. Scuff the surface up a little to help with adhesion. I've used 220 grit and even 180 paper. Spray on 2 coats. It takes one can per quarter panel. Primer over it then spray your color.

Thanks for the compliments!!!!! Thanks for the compliments on the Duster. It makes life so much easier. Work smart not hard Daniel San..... Im glad the pics helped. - - - Updated - - - And yes, blue tape IS your friend.

Paint what you can on the rotisserie From personal experience, paint what you can now while it is easy to get to. If you are planning on welding in the sub frame connectors, do that before you paint. Also you can install some parts before you remove the body from the rotisserie too. Keep...