Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mopar marks is correct - Midland Ross - 71 B Body - Disc
Finding a new one , or used with original Cadium plating , like finding gold
This is correct , or what it would look like
I did it many moons ago
There is a few seals in there if I remember
It’s not difficult
However MARK THE CONTROL VALVE where it sits on the top of box
When you loosen those two bolts that control valve slides back and forth and that’s your center adjustment for your steering
You adjust it...
Sounds good
Thank You for looking
Well I have all the correct pieces anyways with the Pitman Arm on the car and the correct center link now in the garage
Maybe I will mock it up and see if it’s worth changing or what might change on that one end with the inner tie rod
Thanx guys
What i do know
The K Frame matches my Broadcast Sheet - 52
Part # 3583052 - Has a build date around October 1970 from what i remember stamped on front - No skid plate No coin
I also have a K Frame Part # 3583074 with skid plate in the garage , has a coin 74 on the front - Build...
This 1970 and earlier type center link has been installed on my 71 Bee since I have owned the car in 1984 - Both ends are straight
I have rebuilt the front end , went thru the lower control arms , new reproduction upper control arms , just had the K Member sandblasted and painted , rebuilt...
These work with the metal sleeve like the factory shafts
https://p-s-t.com/series-220304-control-arm-pivot-shafts.html#!year%3D1971%7C%7Cmake%3DDODGE%7C%7Cmodel%3DCHARGER