Search results for query: *

There are flats on the pump body that a large blade can be used against the rounded edge of the can to get the can to start moving away from pump and sealing area. The seal area is in the can not the very outer edge. A rubber mallet used easily can also help without damaging can. You can tap...

Read the service manual it tells you how to rebuild the pump. If you're going to take it apart, you should consider the shaft seal. There are seals on the pump where the mount screws for the can go. You also need to inspect the can. They do corrode. If it is more than you want to get into...

Thank you. Ok, I got the right screws. So there are clips required for the interior trim? That I don't have. G

Great help on the key buzzer. I have my feature restored now. I have the connectors for the headlight on also, but nothing connected. So I am assuming not a RR feature. New question on interior upper windshield trim piece. I have the trim piece but it was not installed. Do you know what...

No problem. I am out of town in your neck of the woods this weekend too. What I have found looking at a lot of cars is that a lot of small detailed parts are just left off in a restoration. Reverse lock out, key light, glovebox light, cigar lighter, trunk light, buzzer, heat duct, etc... So...

Hawk, Great job and extremely helpful. Have a question that goes back to the dash removal. I also have a 70 RR with Light package. Did you have the buzzer for key in or lights on, or the headlight delay. Not sure if the RR got it, but I did see one pic of the connector that should have had a...