Search results for query: *

Geez that’s crazy on the price!

Air brush tip cleaners, HF has them cheap enough to toss if you ruin them.

I think marine gas use fuel maybe ethanol free as well.

Around the area we are required to run reformulated and corn in our gas. All produced by Concoco Phillips 66. The only difference in BP was the premium was actually theirs. I was a BP dealer for years. Most of the products are the same except addictive packages. Years ago there were differences...

Nice got a red x!

If it’s a hard plastic line Dorman does sell a variety of repair kits at you local chain parts stores.. they come with barbs and you warm the plastic and force it over the barb. It cools and seals itself, works well!

Do a cylinder leak down test and compression test will tell you if there is a valve problem just not a weak spring . You can remove springs without removing the head. I would start simple.. this requires a little tlc that’s all. The nice thing about these old cars is simplicity! Buy quality...

One must remember that carter also rated CFM differently than Holley. A AVS carb is a very very good carb and simple to maintain. I’d call @Woodruff Carbs for some help, the backfire issue out one side sounds odd and I’d be dialing in my timing and checking for a valve issue not sealing at...

Check Dales Cuda shop. There are a handful of big name vendors that carry that ribbed hose. I agree freight will kill a deal and they already charge a premium for the material.

Mighty fine job!

It’s all a gamble depending on if someone really wants it

It’s worth 2-400, It’s a good known core to most with a top notch resoto including re- plating it could push 700-1100 It just has to be the right person at the right time. These are what I paid for a 4741s’ . Then send one out for a proper resto not a rebuild it’s a easy grand. This is just my...

Sorry only metal on mine, no glass I had one vibrate and fell apart on a small block. Thank heaven you caught it before it burnt up!

That carb wasn’t even restored.. rebuilt but not restored.

I thought the majority of eddy stuff was made in USA, I know the castings are, the avs/afb are marked that too..

No that is usually used for the air cleaner preheat function from what I’ve seen.

Use or send to to me... I really like the old carters, some say a Holley makes more power but I beg to differ.. Reliable as the day is long ! If you do buy another brand carb companies do rate CFM differently ..

Send it back here, I’ll take care of the problem. :lol: I’ve had them leak at the place where the tube goes thru, on a sending unit I soldered the joint and swapped my original back in and tossed the Chinese one.

Sad thing is Bob the greenies are killing them off and the change is pushing towards EAF. With the EAF quality isn’t the same, while it has improved you must still be able to produce raw iron to be made into steel. I’m actually at Granite City Works. We do roll slabs for Mon Valley and Gary...

Interesting subject. I do know some of the guys at our blast furnace must be tested for benzene exposure .. My dad worked in that area and was always warning me about chemicals that would go right thru your skin and into your blood. They also had a coke plant there and now across the street...