Search results for query: *

During Resto had my Radiator shop add low point drain bung , to my new fuel tank, comes in very handy, for draining the remaining fuel from tank! Fuel has a poor shelf life , and easy to remove remainder of fuel, for storage! Works great!

FYI , mine is under drivers seat , laying on carpet, with a velcro strap across it, and the strap catches the carpet for a very secure, attachment! The strap is 2” wide and never moves ! Halon !

Not sure , what the brand of unit you have , but of the two most popular ones , you might do yourself well served , to contact them , their customer service people for assistance !

Yes, had really good success with Clay Taymon , nice Guy, easy to talk with and so far very Quality work performed! No experience with Canadian services ! Clay is in Florida, call him for good service or use your choice! Either way hopefully, it will be a satisfying experience for you , good...

Ok here is my fix for the back up light switch, lever on 67 b-body’s column auto trans , simple and permanent! First pic , is the problem, second is the fix ! Screw a stud into the clip along with with an installed nut to lock down, once in position, tighten nut , done , add a piece of thin wall...

With all the go info here that’s been given! One small thing to ck , is the throttle cable , at the clamp! Turn idle adjustment, all way off , loosen cable clamp and adjust accordingly! In correct, idle at or around 800 rpms! If a carb change recently! Maybe this could help problem!

Not sure how to answer that , it’s the bezel that the two levers for the heater poke through, and the fan switch arm ! It’s chromed , with recess black ground! Reason,I would replace is to swap the letters around on it , for I now have a/c and use this original plate, as the controller! If this...

Hey, that whole technology , 3D printer thing , is so amazing, who would ever had thought, when most our cars were new , that parts could be made for them like this ! Great idea! Can you do a heater control bezel for 67 Gtx with it out of aluminum !

Contact Clay Taymon in Florida , he can give you any upgrade you’d like in yours! Did my 67 AM , nice work ! 941-371-8924 !

Installed my back glass , rope trick per FSM , warm gasket really well, use butyl., no big deal , two man job , bulky !

Cranky is correct, on my 440 4/s , took old flywheel bolt and welded a nut to it , screwed stem that would have gone into the magnet, to get it secure! With flywheel torqued correctly and then removed one bolt and attached my bolt nut combo!

You could try removing the inner from the speedo housing and clean it up good and lube with white lithium grease or graphite and reinstall into housing if cable is ok ! Sometimes a fix if it is a cable problem!

Hey buddy, after complete restoration on 67 Gtx, and verified all correct and oem , gas gauge still not accurate, purchased a little electronic device from tanks inc , after reading about it on our site , inexpensive and works like a charm , easy install! Ck it out !

Hey , who do we like to do a clock repair or restoration on 67 Gtx! Thanks!

I had Clay Taymon in Florida, convert my original am radio to am fm , did outstanding job, also purchased the correct size speaker for dash and rear tray , both dual voice , nice speakers , bonus is true stereo , with much adjustment! He has a web site! Good fellow to deal with! End result, all...

Recently went through this on 67 Gtx, 2 /s wiper , no park ! On the motor you will see round plastic cover , mark two reference marks if never removed , then take wires loose, remove this cover , watch out for the big oring seal , and clean and sand brass points well but gently! Reinstall, using...

I have one on my built 440 , by a reputable performance builder locally , now matter how well sealed up they are , they can be prone to some leakage and also the oem Pcv valves are 50 years old technology, nothing stinks like crankcase oil fumes , when not properly dealth with and helps vacuum...

Needing a sending unit for my 67gtx build and not having any, I purchased a couple only to find out the truth of the matter , no dependable resource, but this meter match , is the cat’s banana! It really works well , and with repop junk as well ! $84 bucks + shipping ! Tanks inc , watch the video

Wife bought mine at a farm and ranch store, looks very much like bubble wrap with foil on both sides, oh I know it sounds cheap but it was and it works great and easy to use ! She found it first for our four seasons RV when we were working in the Nort West upper corner of Colorado all Winter on...