Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Guys let me know if you need any of these window channel clips. I made some and they work with the old pins or .125 steel rod. I’ll just send them to you if you PM me your address/info.
If you are at that point I would try saturating the felt along the slide with silicone and have a helper pull with you. Make sure you don’t twist when pulling. The twisting is what would cause a glass breaking I would think. Maybe some of the other guys have some ideas as well.
Tryed fitting without the shoes. After sanding mine down it was still tight. I put in the original shoes still too tight. Then I didn’t use any shoes still too tight! This tells me the material isn’t right. These have whiskers and if its too tight AND then we use lube then when dirt gets in...
Any updates on this? I just installed my new mylar’s in the wing track and they are more than tight! I got one side working fair to ok but too tight for my liking. The other side is a no go. It gets stuck less than half way in.
I while wheeled the track and used lacquer thinner to clean it out...
Does anyone have any pictures of their rear back seat to trunk bulkhead panel for a 70 or so bbody that you can post here or provide a link to?
Is this one?
Anyone know who sells this plastic slide strip for door windows? I don’t know what it’s called and assume it’s for ease of sliding in the chanel.?!.?!.
Thanks Wayne. This is where the FSM has flaws. People often tell me to look at the FSM. I do! It’s just not always clear and in this case not that accurate with this part.