Search results for query: *

I've seen powder coat die in the sunlight, now I don't know if there are different quality powder coats but a good automotive paint with UV blocker in the clear should last a lifetime, just might chip easier being the powder coat I've removed has usually been soft and tends to smear when the...

putting wheels on a car is like trying to pick out somebody else's shoe's for them , that's why the manufacturer put plain steel wheels on the cars , the little old ladies would keep the wheels with hubcaps on them and the men who hot rodded and raced them changed them, TMO

I ran and still run bias tires and radials, I prefer bias for the firm feel and I've found that pretty much all the bad things everyone has come up with can be attributed to worn and sloppy steering components ,they do show you that, and I've never ever had a bias bow out or come apart , sure...

I'm not sure but are poly glass a bias design ?

God ... I'm still living in the past

Where does any aluminum come from, most metal is mined out of country because the EPA as so many regulations its not economically feasible to mine in the US unless it’s carrying gold so if your that critical what about the vinyl your seats are covered with ,so if you want 100% made in America...

so that wheel will be 4 inch inside and 7inch out

ya , I forgot about the extra inch wheel lip

yes but how much more could you have gone with a different backspace? the question was how ide can I go

I just took the wheels off with the rear end housing sitting on jack stands so it was at ride height , put a straight edge on the face of the drum and measured to the inner wheelhouse and out to the quarter panel , you can figure how wide you can go, I got N50 15 's on the back of my 68...

you do know that the black wheels were meant to be taken off wen you put your racing tires on

forgot to add mine are 9 wide with 4.5 backspace ,I can still put my fingers between the tire and the outer panel, that's why I figured 5 backspace on the 10 with the smaller tire should still clear the leaf springs, I would try them on before buying though

If your backspace is 5" they should, I've got N 50 15 with 4.5" backspace on mine

I'm not giving advise the just sharing experience I thought he was asking about longevity not all of us had enough money to change our tires when they got a little discolored, back then radial were expensive and down right dangerous especially if you like heating them up burning out you see...

I like how the dents disappear and reappear and the left front hubcap gets put back on ,I still don't think a one legged mustang can catch a charger

sticky compound on the front what are we all wheel drive now you still don't know what your alignment specs are you could do better on your little timed track if you figured that out , we obviously have different tastes in what our vehicles are used for I sense a little insecurity in your...

good example just about as close with your caster , camber and steering axis inclination running 18's with what backspace

Boy we just lost he main subject sorry

when you put 18 inch wheels on the front of an old mopar you might as well scrap the whole suspension and put something else in your way out of the engineered specs

not into wagon wheel thanks anyway