Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I assume you're talking about the nss on an automatic. I had the same problem and I found out there are 2 sizes that can be bought. I need the one that is referred to as long. What that describes is the length of the hex fixture that's part of the switch. Both sizes will fit perfectly, but the...
yes you do. I had mine all apart to replace both the signal and the ignition switch. You have to get down to ignition switch in order to get to the key cylinder. Its a small metal clip on the side of the cylinder that you push in on and than the cylinder can be pulled out. I didn't replace the...
Thanks for the replies. Will look up the specs and test as Steve says. This is my first time doing anything to the differential and I might have a case of being of being overly concerned. Thanks again.
Just replaced pinion seal. I have read many threads on this subject and followed the advise of those who said to mark the nut, flange, cover and the case so you get back close to the bearing preload and then maybe add just a touch more. Did all that and reconnected the drive shaft. Before...