Search results for query: *

I have a gutted ballast, petronix coil, got a dry transfer to add oem writing to the coil.

The am requires an 8 ohm. Running less will burn out the transistor. I’m assuming two 4 ohm speakers will be ok. The three speaker cars had the am/fm 8 track. I don’t know that running extra speakers will do anything for sound with the am. I had Devin Duke rebuild my radio and I got a soeaker...

My petronix in a Halifax hops distributor has been going strong for three years so far.

Regarding chamber design and advance, a close friend had a Sonny Leonard pro stock engine and it made best power at 25 degrees. I don’t know what they are doing today, this was 20-25 years ago.

I’ve found that engines like a certain amount of advance and pushing it will make them run choppy. My theory is when they get to where they don’t feel free to rev, it’s a silent knock. Maybe not enough to down it right away, or it’s so close to the edge it’s not worth it. The Mopar info with the...

Not sure why anybody would complain about a member asking. It’s traffic for the site, it’s how the site makes money. Don’t like it, don’t get involved in the thread.

I bought the 69 GTX and on the drive home I noted the gauge would flutter, and do some weird back and forth stuff. I put it on my punch list. Decided I should just get a new look alike reg that was electronic and keep the mechanical one for a spare. I figured it wasn’t grounded good, but I...

Mine doesn’t. 69 style solid state off eBay. Runs like 13.4 or so. I have good wires and a rust free factory metal car. Might make a difference.

The Yokim brand on Amazon is three times as bright and works with the stock flasher.

I run the Yokim brand I found on Amazon. Easily three times as bright when comparing against my garage door.

I saw quite a drop in load on the ammeter when I put led tail light bulbs in. Yokam brand on Amazon. Easiest upgrade I’ve done to a car.

A two field will work with the old reg if he grounds the second field.

A side note on this one is I just got mine in yesterday and I don’t care for how it still jumps around. For some reason the manufacturer doesn’t want it grounded to the battery, the seller told me. They want it only to the body ground via the screws. I always run a ground right to the VR and...

Timing moving around at idle can be the chain. Test by baring the motor over and watching the rotor for movement.

Thanks. There’s no way a guy even at Napa would find that.

It’s made for two wires. The other ones that came off are totally different and are tin where this one is brass.

For a 69 b body with AC. Resistor for fan speeds failed.

Called the place showing it works with an 8-10 ohm radio and it does not.

I’ve been searching and the dual coil one appears available at other places and says not to use with oem radios. Hmm 4 x 10 Dual Voice Coil Low Profile stereo speaker

It’s a stock rebuild. I have an audiovox convertor for the fm, guy said those were the best back in the day. He buys and sells the convertor s a lot. I wanted the stock look of the Plymouth writing and Devin Duke has done great on all my electric rebuilds. He can bang it out in time for the show.