• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. WileERobby

    Adding rear sway bar pros or cons

    Add me on the "pro" side of a rear sway bar.
  3. WileERobby

    Replacing sway bar links question

    I'm somewhat confused. I've always serviced a similar job on a lift. In your case, replace both links with new ones.
  4. WileERobby

    '74 Charger SE Idler Arm Issue

    Pics !!! How about YOUR pics ? You got the correct idler arm in there ?
  5. WileERobby

    Torsion bar adjuster arm hitting frame rail

    The load is on the LCA, so there's a good probability the bushings are worn. Plus, you must install torsion bars with suspension at full hang without bumper-stops in to enable full adjustment of the torsion bar adjustment arm/bolt.
  6. WileERobby

    Steering wheel 90 degrees off to the the left after centering all steering components

    When the centerlink is disconnected, is the steering box/pitman arm centered lock-to-lock by itself ?
  8. WileERobby

    Torsion Bar adjuster bolt

  9. WileERobby

    Thought it was a good idea

    Brake fluid... eats paint... ear plugs... twinkies...
  10. WileERobby

    Thought it was a good idea

    Moral of the story: PUT THE PARTS IN AND FINISH THE JOB. Worry about the core charge later.
  11. WileERobby

    Factory Brakes

    What he ^ said.
  12. WileERobby

    Factory Brakes

    Yes. Upgrade that, or another car ? Basic replacement of what, the entire setup ?
  14. WileERobby

    1973 B-body suspension overhaul

    Check with PST to replace the wearable suspension parts, shock absorbers, etc. along with ^^ subframe mounts.
  15. WileERobby

    Urethane leave spring bushings

    I asked a guy not long ago who did that, what's the difference ? He said, basically a few hours work.
  16. WileERobby

    Moog K772 Upper Ball Joints - Better Check Before Installing

    As do I... as do I.:(
  17. WileERobby

    Can't catch a "brake"

    What proportioning valve are you using ?
  18. WileERobby

    Steering box removal. It's never easy for me.

    A nailset, and I get those popped out in seconds.
  20. WileERobby

    Is this a thing ?

    And I would highly recommend that you put the clip on, it's not difficult to snap on.
  21. WileERobby

    70 Road Runner front drum brake question...

    I can tell you from personal experience with Craig ^^^^ your call to him will be the best thing you did all day !
  22. WileERobby

    Original Tri Nuts To use or not to use??

    I like original. Good metal.
  23. WileERobby

    Torsion Bar Opinions? - 70 Road Runner

    Clocking refers to indexing the end of the torsion bar where it goes into the hexagonal anchor in the LCA.
  24. WileERobby

    brake pads / shoe better stoping power ?

    Do yourself a favor... call Craig ^^^
Back
Top