Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok, I think I'm getting close.
Female spades 1 and 2 go to the right side, 3 & 4 to the left. I have female spade 1 attached to the split for the console wiring. The male butt should go to female butt 2 and the wire from the main harness goes to female butt 1. Is that correct?
Thanks again, you have been a great help!
Here is where I am so far (the blue wires on the lower harness are the rear speaker wires). Also, not sure if you saw my next question on the ignition light? I don't have a bracket/holder for the bulb.
Is there a bracket/bulb holder for the ignition light? I have the time delay/light harness with the bulb, but it looks like the bulb should be in a bracket/holder to ground. The hole in the dash pad above the key is all I have. Pictures of the bracket/holder would be appreciated.
Thanks!
I think I have it mostly sorted out. Small issue, I have 3 yellow wires at the left door switch and one on the right. None of the ones on the left are physically long enough to reach to the right side (original wires).
New problem I'll post as a new thread-Ignition light.
Thanks again for...
I'm in need of help figuring out what gets connected to what with an accessory harness. It appears to be part of the door jamb switches and includes the console, a box with 3 terminals (buzzer?). The Shop manual only has a diagram for the Dart and doesn't include the harness(es) I have. Thanks!