Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
65 Coronet rear bumper is the same as a 64 Polara rear! Ply. rear bumpers interchange from 63 - 65, Front bumpers are a 1 year only! Both Ply. and Dodge
Yes that was factory! It prevented the heat from hot oil from heated the fuel in the intake! Simple explanation! After awhile it became oil soaked and discarded! IMO it probably worked better than the insulation! BTW there was also a small shield attached to the to the front of the valley pan!
Every one I've ever seen in my 40+ yrs. of messing with the early big blocks that bracket is dipped in rubber, also the dip stick was painted! I've seen the tube painted and also bare with the end with overspray at the block end!
383's are an inch smaller in width than the R.B.s so there is more room between the heat riser and the shock tower! I have less than a 1/4 " clearance so no counter weight!
The only clearance problem is on the pas. side where the original flapper counter weight is! There is not enough room The weight will hit the shock tower! Remove it and good to go! Be sure to take the plate and shaft out and plug the holes! If you don't it will rattle all the time!