• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. pedal2themetal

    HI, looking for some rear gears help

    Yeah Door tag calls for F 78 X14" .. F is 7.75... Thanks everybody for the thoughts to think.. Good luck take care be safe tim
  3. pedal2themetal

    HI, looking for some rear gears help

    HI all, I have a 75 fury with 318. Looking to have the heads reworked with bigger valves, Bigger cam ( I have a .440 IN,EX. in it now) but want to go better or bigger. Carb is a 450 cfm QFT. Holly, well go bigger if have/need to.. Tires are P225 X 70 14" I'm thinking it has the 2.73 Rato...
  4. pedal2themetal

    What is a good timing for my set up..

    HI, Yeah , I know it was going to need more.. but TDC with all the smog crap on it the tag under the hood does say TDC at 750 rpm's.. but that's all gone really wasn't that much anyway.. mostly just the air pump.. yeah lean burn the plugs are white , but I do run premium in it. I do have a dial...
  5. pedal2themetal

    What is a good timing for my set up..

    HI, What I have is a 75 318. gasket matched heads stock piston and bore 450 cfm Quick Flow Holley 1" spacer square bore to spread bore performer intake 0* timing set Cam is .420 lift at .50 In and Ex. duration 270 In, and Ex. 110 lobe separation. Stock exhaust manifolds true duels out. Under...
  6. pedal2themetal

    Headers for the 318 B Body Fury

    HI Thanks,, yea I'm just going to wrap them with header wrap. (the army green stuff.) to keep under hood heat down.. Thanks again take care be safe tim
  8. pedal2themetal

    Headers for the 318 B Body Fury

    HI Who are you guys/gals using for headers on your B body Fury's 318 cu. Just looking for someone with experience on good fitment. long tube, shorties are ok too but usually to expensive, having to split the linkage is ok.. Thanks, good luck take care be safe tim
  9. pedal2themetal

    Starting Line Sequence

    Hi Not really, if you stage shallow . the front end is going UP gives you more room to not mess up, no forward motion good luck take care be safe Me
  10. pedal2themetal

    Exhaust heat riser &HP

    HI , Yeah I was thinking once its open there isn't much influence on flow. It seam's to operate very easy.. so I might just leave it alone for now.. Thank's all for the reply's ... I would rather spend $$ on headers down the line.. Thanks again Take care, Be safe tim
  11. pedal2themetal

    Exhaust heat riser &HP

    HI, I'm looking to have the heat riser cut out on my stock exhaust manifolds with fresh duel's installed. They want 300 to cut it out.. My question is .. is the heat riser taking power away in exhaust restriction. Weather or not is it worth removing ?? Thanks take care, be safe. tim
Back
Top