Search results for query: *

These pictures are from Wayne Brewers site. I think the parts are the same except the bellhousing mount and the rod to the steering column, depending the application.

As far as I have been told the linkage for both are the same between B and E 4sp's , other than the rod that goes to the steering column is a different length. I will get into the parts book and try to get the part #'s sometime today. Mopar made some things difficult to decipher. Yes auto are...

Sadly these linkages were removed years ago. I have have E body lockout linkages in a box, I will dig them out and take some pictures for reference. I was going to a friends house today but the weather isn't going to cooperate, so I am going at a later date. He has a 70 Superbird 4 sp with all...

Tallhair ' The 70 parts book and the 70 factory shop manual do not give you a whole lot of information. These are the only illustrations that I could find. The parts book mixes 3 and 4 speed parts all together. I will try to get you some part #'s. Also I been told that the B and E Body linkage...

Bore

HT 413 There are lots opinions thats why I always check with the cam people.As far as the articles there is good information out there also.I feel better to just varify my selection with the cam grinder.I see you got some different selections for your application from different grinders also...

cam selection I call the cam grinder and ask there opinion.Give them the specs on the car,weight,trans,gears,engine specs,street,strip or combination of both and have them tell you what cam, valve components to use with your combination.Making the the wrong selection can make for money that is...

rear width 2852838 68-69 B-body 54-15/16" same as 1970 B-body, 1/32" difference 3432295 70 B-body 54-29/32" same as 1968-69 B-body, 1/32" difference Jeff

Brad Penn Brad Penn here is the info and the site. http://www.penngrade1.com/ Jeff

Mesopic Try this site it should give you what you need. Jeff http://www.bgsoflex.com/speedo1.html

pedals Check this sites http://www.moparmusclemagazine.com/techarticles/interior/mopp_0202_chrysler_four_speed_pedal_assemblies/viewall.html http://www.brewersperformance.com/products.asp?cat=105

rear diff identify Hemi Just as it says spotters guide.

bleeder Chris I purchased the bleeder at a garage that was going out of business 40 yrs ago. The unit I have you pressurize with shop air.I will do some checking around to see if I can find something that is reasonable...

]il pressure The engine runs under pressure,some run 80-100 psi and no problems.I have done this for years without any ill effects and I usually pressurize 45-60 psi.I have done this to find a pressure problem and also to pre oil a fresh engine...

cam change 2 more pictures

cam change Chimp I will post some pages from the 68 shop manual. Hope this Helps you Jeff

oil pressure B body What I have done with problems like this is I took an old brake pressure bleeder and cleaned it out real good.I put motor oil in the bleeder and adapted the hose to fit in where the oil sending goes.Remove the oil pan and pressurize the system, if you see excessive oil...

a/c pics These pictures are of a 64 dodge 383 2 br carb. 2 belts run the a/c and the alternator as you can see in the pictures. There is a spacer that is behind the idler pulley as you can see in the picture. The other 2 belts run 1 runs the waterpump and the other runs the power steering. The...

cover Big biock 1942-248 part number 64-71 Small block 2892-912 part number 69-71 Jeff