Search results for query: *

Thanks for all the input after 50 years of loving these cars and never seeing one 69 Coronet with a wing or spoiler I thought the story was phony, but I don't know everything Dodge had going back then. Like I thought the first liar doesn't have a chance!

I was told that a 69 Coronet super Bee some models came from the factory with a spoiler on the trunk. Can you confirm or deny their existence?

Thanks for the diagram, unit is on the bench. Now the fun begins, maybe.

Is there any thing else that comes out with the upper- lower seal? Don't need any surprises.

That genius! Both shafts are leaking,runs reservoir dry in 70 miles. What holds bottom seal in? Just take off pittman and crank wheel and hold it there? Probably will remove box, want to look at the return fluid line inlet. Isn't there a spring and check ball underneath? Wouldn't have to do...

After several adjustments of fingers in and out, to see action, was able to get the release and grab that wasn't there before. Into reverse with no grinding. Next item is finding someone to rebuild my power steering gearbox, works fine leaks really bad. Can't get Cardone to go it. Anyone fairly...

Is there any specific reason for the 1.700 height or just a reference? My clutch is a hays brand not stock and I don't know the nominal height is. I made sure all fingers were equal before assembly my question is as long as fingers are same height and thrust brg contacts them at same time, the...

Thanks, didn't know that. It's back together now with a normal pedal. Anymore trouble and I will look at this first .

My thanks to all that responded, what I found after disassembling down to flywheel 2 of the 3 fingers worked the same &1was down half inch (reason for partial disengagement) hays clutch on top of cover has hex head over each finger, turned it and finger moved,evened all 3 and hoped. Had damn...

Need some advice... having lots of trouble shifting smoothly, clutch is realitively new, after inspection could see 2 fingers out evenly & 1 maybe 1/2" in or collapsed. Any recourse to get finger to release or removal only?a833 transmission fork not bent

This subject (scam) has probably been brought up before but since it has just reared its ugly head again to me I wanted to state for anyone that hasn't heard of a outfit called Once Driven, be aware and throughly check out feedback of past customers on Yelp and other such sites. These people are...